Active Member
|
[China]
Address: 4/F, Building C, Weihao Industry Park, No.1026, Songbai Road, Xili Town, Nanshan District, Shenzhen, China. 518055
Contact name:Hilary Lin
Shenzhen Nufiber Systems Technology Co., Ltd. |
|
|
OEM 10G Copper RJ45 Module 30m Marvell Chipset Rate Matching mode
PRODUCT DESCRIPTION
SFP+-10GBASE-T-RM Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T/ 5Gbase-T /2.5Gbase-T/1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC will be changed to low-power state.
PRODUCT FEATURES
Cable Length
| Link Port | Cable | Reach | Host Port |
| 10Gbase-T | CAT6A | 30m | 10GBase-R |
| 5Gbase-T | CAT5E | 50m | 10GBase-R |
| 2.5Gbase-T | CAT5E | 50m | 10GBase-R |
| 1000base-T | CAT5E | 100m | 10GBase-R |
| 100base-T | CAT5E | 100m | 10GBase-R |
+3.3V Volt Electrical Power Interface
The SFP+-10GBASE-T has an input voltage range of 3.3 V +/- 5%. The 4V maximum voltage is not allowed for continuous operation.
+3.3 Volt Electrical Power Interface | ||||||
| Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions |
| Supply Current | Is | 900 | 1100 | mA | 3.6W max power over full range of voltage and temperature. See caution note below | |
| Input Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | Referenced to GND |
| Maximum Voltage | Vmax | 4 | V | |||
| Surge Current | Isurge | TBD | mA | Hot plug above steady state current. See caution note below | ||
Caution: Power consumption and surge current are higher than the specified values in the SFP MSA
Product Pictures
Outline Dimensions (mm)
Compatibility
Certificates
FAQ
