|
[China]
Trade Verify
Address: Room 1806, Block B, Haiyi International Building, Fengcheng 5th Road, Weiyang District, Xi'an City, Shaanxi Province
Contact name:Summer
Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Honda Gasoline One Meter Double Disc Concrete Ride-on Trowel
Description of Concrete Trowel Seat-Driven Machine
The controller can be connected to a humidity detection device.
When it is detected that the humidity of the wall is lower than the
rated value, the water spray pipe automatically sprays water. When
the humidity of the wall is detected to be higher than the rated
value, the air jet port automatically sprays water. There is a
one-way valve, and a stop valve can be set on the spray pipe.
The wall-troweling machine includes a cover, a disc, a casing, a
motor, a blocking block, and a blade. The disc is the main part, a
blocking block is arranged on the upper surface of the disc, and a
cutter is arranged upward on the disc. The disc is clamped with the
cutter, the blade is movably connected to form the cutter, the
cutter is connected upward with a motor, the motor and the cutter
are connected through a transmission shaft, and the motor is
provided with a casing outward, which is characterized by a water
pump control handle, a water pump switch, an atomizing nozzle, a
mist Chemical nozzle, hose, water pump, kettle, motor controller,
motor control handle and lithium battery, the motor is AC and DC
dual-purpose motor, the outer casing is made of insulating
material, and the inner casing is provided with a lithium battery.
Parameter of Concrete Trowel Seat-Driven Machine
| Model | ZT80L | ZT100L |
| Engine type | Honda | Honda |
| Power | 9.6(13.0)kW/hp | 17.6(24.0)kW/hp |
Blade/Power | 70-150/3600rpm | 70-150/3600rpm |
working diameter | 1910*1030mm | 1910*1030 |
Disc diameter | 800mm | 100mm |
| Blade size | 1260*150mm | 350*150 |
| Weight | 260kg | 386kg |
The Working Principle of Concrete Trowel Seat-Driven Machine
1. Before starting, check the operating parts of the machine for
abnormal conditions to ensure the reliability of operation;
2. Confirm that the switch of the main brake is in the closed
state, do not step on the accelerator when starting, pull the
damper to start, and return the damper after the machine starts;
3. Start the trowel, and hold the joystick tightly to keep the fuselage balanced;
4. The trowel must be stabilized when the trowel is working, and the direction should be adjusted in time when working on the floor to keep the operation of the machine under control;
5. During the construction process, pay attention to rough grinding first and then fine grinding. After rough grinding the bottom grinding disc, remove the grinding disc when the ground is suitable for fine grinding, and then use a spatula to finely grind it.
The Advantages of Concrete Trowel Seat-Driven Machine
The car trowel is suitable for the troweling of large areas of
concrete floors. Compared with the hand-held trowel, the
construction efficiency and quality are significantly improved. The
use of double grinding discs is simple, flexible, and quick to
operate, and gradually replaces the hand-held trowel, saving time
and effort. , is a commonly used equipment in construction
engineering. The car trowel is to scrape off the raised concrete
with a scraper, and then use a cloth spiral that rotates in a
separate direction to cut off the raised part of the concrete from
left to right. When the elevation of the design standard is
reached, the remaining material will be sent to the right side of
the screw.
Features of Concrete Trowel Seat-Driven Machine
1. Greatly reduce labor intensity and provide work efficiency;
2. Double grinding disc construction operation, quick slurry
lifting and smoothing, and has a good compaction effect on the
ground;
3. Mechanical operating system, infinitely variable speed,
sensitive response, comfortable and easy operation;
4. Equipped with the variable-speed operation, high speed, fast
finishing, and low-speed operation can make the pulping of the
grinding disc powerful, and the construction effect is remarkable;
5. Equipped with a high-power engine, electric start/hand-pull
start, and strong power;
6. Equipped with an emergency stop switch, which can quickly shut
down the engine to ensure reliable operation;
7. Equipped with LED lighting, convenient for night construction,
automatic sprinkler function;
8. Equipped with liftable walking wheels, which are convenient
for changing smears, grinding discs, and walking.
