Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
Verified Suppliers
|
|
Concrete Trowel Cement Floor Polishing Seat-Driven Machine
Description of Concrete Trowel Seat-Driven Machine
1. This machine is mainly used for troweling concrete surfaces. It
can improve the compactness of the concrete surface, and resistance
to wear.
2. The operation of the driving type greatly reduces the labor
intensity, and improves work efficiency, with the double disc, more
weight, and compaction has a better effect on the ground.
3. Electric starting engine, power solid and reliable, stable
operation.
4. Handle enables the operator to control and operate freely and
safely.
Parameter of Concrete Trowel Seat-Driven Machine
Model | ZT80L | ZT100L |
Engine type | Honda | Honda |
Power | 9.6(13.0)kw/hp | 17.6(24.0)kw/hp |
Blade/Power | 70-150/3600rpm | 70-150/3600rpm |
working diameter | 1910*1030mm | 1910*1030 |
Disc diameter | 800mm | 100mm |
Blade size | 1260*150mm | 350*150 |
Weight | 260kg | 386kg |
The working principle of Concrete Trowel Seat-Driven Machine
The water spray pipe can be made of plastic pipe, and the tail of
the water spray pipe is connected to an atomizing nozzle. The
atomizing nozzle can include a spray head. Using the atomizing
nozzle, atomized water can be sprayed, which can humidify the wall
and make the wall humid. evenly. The water pump control handle and
the motor control handle are provided with fixed rods, the fixed
rods are hollow, and the fixed rods can be provided with a water
pump switch or a motor controller. The motor controller can be
connected with a leakage protector, the top of the casing can be
provided with a vertical level, which ensures that the wall after
troweling is perpendicular to the ground, and the casing can be
movably connected to the motor, and the casing and the motor can
pass through. Bolted. The shell can be provided with a jet port,
which is connected to the air pump or fan through a plastic pipe.
The ejected gas can accelerate the volatilization of water, which
is conducive to the rapid drying and smoothing of the wall. The jet
is used for drying, and the water is used for humidification.
Convenient and effective. The mounting cover may be made of
metallic material. The motor controller can be connected to the
controller.
The controller can be connected with a humidity detection device. When it is detected that the humidity of the wall is lower than the rated value, the water spray pipe automatically sprays water. When the humidity of the wall is detected to be higher than the rated value, the air jet port automatically sprays water. The air jet port can be set. There is a one-way valve, and a stop valve can be set on the spray pipe. The wall troweling machine described herein includes a cover, a disc, a casing, a motor, a blocking block, and a blade. The disc is the main component, the blocking block is arranged on the upper surface of the disc, and the cutter is provided upward on the disc. It consists of a blade, the disc is clamped with the tool, the blade is movably connected to form a tool, the tool is connected upward with a motor, the motor, and the tool are connected through a transmission shaft, and the motor is provided with a casing outward, which is characterized by the water pump control handle, water pump switch, fog spray nozzles, atomizing nozzles, hoses, water pumps, kettles, motor controllers, motor control handles and lithium batteries.
The advantages of Concrete Trowel Seat-Driven Machine
1. The walk-behind trowel requires people to hold the machine for
construction, and it is very tiring during the operation. This car
trowel can sit and open, the handle is concentrated, the ergonomic
design is in line with the ergonomic design, and the seat can be
installed. Effectively improve the comfort of work and reduce the
labor intensity of workers.
2. Equipped with a high-horsepower engine, the quality of the
engine is guaranteed, which makes it easier to start the troweling
machine, and greatly improves the efficiency of the finishing and
troweling operation of the equipment. The whole machine runs with
strong power. Stable during light work.
3. Adopting the design of a double trowel, the area of finishing
and troweling operation has been increased, and the efficiency of
harsh construction work has been improved. Equipped with transfer
wheels, it is convenient for workers to move and transfer.
Using a car trowel for construction when finishing and leveling the
concrete floor can bring great convenience to the majority of
workers and reduce their own labor burden.
Maintenance of Concrete Trowel Seat-Driven Machine
In the daily use of the car trowel, attention should be paid to
reasonable and effective maintenance, and regular maintenance and
maintenance will help to maintain the equipment in good operating
condition and can have excellent performance. With proper
maintenance, your trowel will last longer.
1. Check and replace the engine oil of the trowel on a regular
basis to check whether the engine oil is sufficient. If the engine
oil is insufficient, it should be replenished in time. When
replacing the engine oil, be careful not to mix old and new oil to
prevent oil from appearing. spoiled.
2. Add lubricating oil to the bearing parts of the troweling
machine to ensure that the machine can get a good lubrication
effect. Reasonable filling of lubricating oil can reduce the
friction and wear between the various parts, and reduce the
occurrence of the failure rate of the fuselage. Extends the life of
components.
3. Before the construction work of the car trowel, comprehensively
check whether the various parts of the fuselage are properly
connected, and tighten the loose parts according to the specified
gaps to prevent the loose parts from loosening during operation,
and timely repair the aging and severely worn parts. to replace.