Home Companies Shaanxi Zhongtuo Mine Equipment Co.,Ltd

Post Tension Anchor Reliable Performance Suitability For Bridge Construction

Shaanxi Zhongtuo Mine Equipment Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: Room 1806, Block B, Haiyi International Building, Fengcheng 5th Road, Weiyang District, Xi'an City, Shaanxi Province

Contact name:Summer

Inquir Now

Shaanxi Zhongtuo Mine Equipment Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Post Tension Anchor Reliable Performance Suitability For Bridge Construction

Country/Region china
City & Province Shaanxi
Categories Metal Building Materials
InquireNow

Product Details


Name: Multi-Holes Post Tension Anchor Used in Bridge Construction. This anchor is specifically designed for prestressing concrete in engineering construction projects, particularly in bridge construction. It is utilized by pre-installing and positioning the anchor before pouring concrete, and then burying it at both ends of the concrete. The anchor includes two bellows-shaped end faces, which provide stability for the jack during tensioning. To ensure optimal performance, it is essential to maintain the anchors properly, keeping them free from rust, water, and other debris. Additionally, it is recommended to apply lubricant on the outer surface of the tool clip and the inner surface of the taper hole of the anchor plate before use, while also regularly removing any debris from the clip's surface. Safety measures must be taken during tensioning, and it is crucial to ensure that no individuals are present near the tensioning jack. It is important to note that the anchor system should be used exclusively, without mixing it with other systems. For technical data, the YJM13 Anchorage includes specifications for the anchor head, bearing plate, duct, spiral reinforcement, and stressing jack, such as ΦA, B, Square, Round, ΦE(ID), and ΦF. With its reliable performance and suitability for bridge construction, this Multi-Holes Post Tension Anchor is a valuable asset in the field of engineering.



Application description
It is suitable for anchors used for prestressing concrete in the process of engineering construction. Generally used in bridge construction, pre-installed and positioned, and then poured concrete, buried at both ends of the concrete, that is, the two ends of the bellows, which are the end faces set for the stability of the jack during tensioning.

 

 

Product parameters
 

Technical data of YJM13 Anchorage
SpecificationAnchor HeadBearing PlateDuctSpiral ReinforcementStressing Jack
ΦABSquareRoundΦE(ID)ΦFHΦGN
C*DΦC*D
YJM13-1384080×10-35803063QYC270
YJM13-27642115×80120×80451204083YDC1100
YJM13-38342120×80130×805012040103YDC1100
YJM13-48742130×87135×855013550103YDC1100
YJM13-59742140×92140×1005514050104YDC1100
YJM13-610745150×97150×1256016050124YDC1100
YJM13-710745150×97150×1256016050124YDC1100
YJM13-811745165×115165×1356017050124YDC1500
YJM13-912748175×125175×1407018050124YDC1500
YJM13-1013648180×130180×1508020050144YDC2500
YJM13-1113850180×130180×1508020050144YDC2500
YJM13-1214350190×140190×1508021050145YDC2500
YJM13-1314753190×140190×1508021050145YDC2500
YJM13-1415353195×150200×1608022050145YDC2500
YJM13-1515755195×150200×1609022050145YDC2500
YJM13-1616755210×160210×1859024060166YDC2500
YJM13-1717258220×175235×1859024060166YDC3500
YJM13-1817658235×175235×1859026060166YDC3500
YJM13-1917658235×175235×1859026060166YDC3500
YJM13-2019660270×185260×2009027060166YDC3500
YJM13-2119663270×185260×2009027060166YDC3500
YJM13-2219665270×185260×2009027060186YDC3500
YJM13-2320665295×245275×26010028060186YDC4000
YJM13-2420668295×245275×26010028060186YDC4000
YJM13-2521668300×260275×29010029060186YDC4000
Technical data of YJM15 Anchorage
SpecificationAnchor HeadBearing PlateDuctSpiral ReinforcementStressing Jack
ΦABSquareRoundΦE
(ID)
ΦFHΦGN
C×DΦC×D
YJM15-1434680×1280×2035803084QYC270
YJM15-28348130×85135×805012040104YDC6500
YJM15-38748130×87135×855012040104YDC650
YJM15-49748140×92140×1005014050104YDC1100
YJM15-510748150×97150×1205515050104YDC1100
YJM15-612250165×115165×1357017050124YDC1500
YJM15-712250175×125175×1357017050124YDC1500
YJM15-813753180×130180×1508019050124YDC2500
YJM15-914753190×140190×1508020050124YDC2500
YJM15-1015753195×150210×1609021060144YDC2500
YJM15-1115755210×160210×1609021060144YDC2500
YJM15-1216755210×160210×1859023060144YDC2500
YJM15-1317755220×175210×1859023060144YDC3500
YJM15-1417758225×175235×1859024060144YDC3500
YJM15-1518760235×175235×1859026060165YDC3500
YJM15-1618760240×175235×1859026060165YDC3500
YJM15-1719763250×185265×20010028060165YDC4000
YJM15-1819763270×185265×20010028060165YDC4000
YJM15-1919763270×185265×20010028060165YDC4000
YJM15-2021768295×245285×26012029060165YDC5000
YJM15-2121770295×245285×26012029060165YDC5000
YJM15-2221770295×245285×26012029060185YDC5000
YJM15-2323773310×260320×26012032060185YDC5000
YJM15-2423775310×260320×26012032060185YDC5000
YJM15-2523778310×300320×30012033070185YDC6500

 

 

 

Warm tips
1. The anchors should be kept properly, and there should be no rust, water, and other sundries in use.
2. Apply lubricant on the outer surface of the tool clip and the inner surface of the taper hole of the anchor plate before use, and often remove the debris on the surface of the clip.
3. Safety measures should be taken during tensioning, and no one can stand after the tensioning jack.
4. The anchor system should be used together and cannot be mixed with other systems.

 

 

 

 

 


FAQ:
Q1: Are you a factory or trade company?
A1: We are a factory. And we have ourselves trading company.

Q2: What is the exact address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.
Q3: Warranty terms of your machine?
A3: One-year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts for the machines?
A4: Yes, of course.

Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, and 3phase. The voltage can be customized according to your requirements.

Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)

Q7: How long will it take to arrange production?
A7: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days.

Q8: Can you accept OEM orders?
A8: Yes, with a professional design team, OEM orders are highly welcome.

Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.

Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of the freight.

Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.


Why you choose us:

1. We are a real factory offering products and providing free technical advice.
2. Company in business for many years and served Over 50 countries' customers.
3. All machines with CE, ISO, and SGS certificates. Machine and spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.

Hot Products

Introducing the Multi-Holes Rectangle Anchor for Stressing Single PC-Strand. This hydraulic plunger ...
Introducing the Hydraulic Double-Piston Concrete Pump Grouting Pump with Cement Mortar Grout. This ...
Description Product: Name: Ultra Huge Rock Splitter Mounted with Excavator Features: The Ultra Huge ...
The Non-Explosive Hydraulic Rock Splitter for Mine Breaker is a highly efficient and reliable tool ...
The High Pressure Sewage Sludge Treatment Hydraulic Slip Mud Pump is a reliable and efficient piece ...
The Hydraulic Rock Splitters Concrete Piston Splitter Stone Breaker Equipment is a professional and ...