Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
Verified Suppliers
|
Description of Upsetting Cold Forging Machine:
The steel bar upsetting machine uses the principle of hydraulic
cold heading to plastically deform the end of the steel bar,
increasing the diameter by 4~6mm, and then processing the thread.
The actual cross-sectional area after processing the line is larger
than the original steel bar cross-sectional area, and the tensile
strength of the joint is improved.
Product Usage:
It is used to upsetting the head of the steel bar. After the
upsetting, the strength of the steel bar base material is improved,
the tensile strength is already reached, and the thread rolling and
connection are performed. Improve the safety of the project.
The equipment operation is simple and easy, and one person can
operate it. After the steel bars are placed, the foot switch under
the tower will automatically run the equipment, which saves labor
and reduces workers' fatigue and can be processed continuously.
Technical Parameter of Upsetting Cold Forging Machine
Motor | Oil Pump | ||
Power | 7.5kw | Nominal displacement | 10ml |
Voltage | 380v | Rated voltage | 31.5mpa |
Speed | 1440r/min | Rated speed | 1500r/min |
Safety operation rules for steel bar upsetting machine
1. The staff must undergo technical training and pass the skill
assessment before they can work on the job
2. Before formal processing, the equipment should be debugged and
run for 2-3 minutes, and the processing operation can only be
performed after it is normal.
3. The incision of the steel bar blanking is straight without
bending.
4. Before processing steel bars, the machine should return to the
initial position before processing to ensure consistent processing.
5. There should be no transverse cracks in the processed steel
bars, and equipment failures should be eliminated in time.
6. When refueling, No. 46 hydraulic oil should be added.
7. The staff should abide by the safety protection regulations for
engineering personnel.