|
[China]
Trade Verify
Address: 15th Fl, Bldg No.13, National University Science Park(East), No.279, West 3# Ring Rd, Zhengzhou, China
Contact name:Andrew
Henan Zhengzhou Mining Machinery CO.Ltd |
|
Verified Suppliers
|
|
|
Enverinomental Friendly Waste Disposal Incinerator Rotary Kiln Horizontal Calcining
Rotary Kiln Incinerator Applicable material:
Hazardous waste, sludge waste, medical waste, steel mill flue ash,
sugar residue, paper mill residue, aluminum slag, pharmaceutical
filter residue, oily sludge, electroplating sludge, paint residue,
industrial waste, PVC material, municipal waste, domestic garbage,
batteries, tires, leather sludge, and so on.
Rotary Kiln Incinerator Application:
It is widely used in the field of industrial waste, medical waste,
municipal solid waste, and so on.
Rotary Kiln Incinerator Working Principle:
Rotary Kiln Incinerator can deal with solid and liquid waste
simultaneously, solid waste is sent into rotary kiln by special
conveying equipment, liquid waste is sprayed into the feed end of
the Rotary Kiln Incinerator body by means of an efficient atomizing
device, the waste in the rotary kiln should experience the process
of water evaporation, volatilization analysis, ignition and
combustion process, The ash portion is discharged from the bottom
of the second combustion chamber, the generated flue gas enters the
second combustion chamber, blended with two combustion air in the
second compartment, complete combustion of flue gas, achieve
exhaust safety standards discharge.
Specifications:
| Hazardous waste rotary kiln for waste incinerationφ2.6m*13.2 technical parameter. | |
| Inner diameter of shell 2600mm | Shell length 13200mm |
| Downstream arrangement, that is, the direction of material flow is consistent with the direction of smoke flow, the angle of the kiln body is 1.5 degrees. | |
| Variable frequency speed control of rotary kiln | 0.1-2.2r/min |
| Drive mode | Single side gear drive |
| Main Motor | 30kw |
| Kiln temperature:850-1200 degree | Surface temperature of kiln shell: 180 degree |
| Expansion mode | Linear free expansion at both ends |
| Total equipment weight | approx. 54.5t |
| ★Customized waste incineration rotary kiln can be provided according to the customers' different industries | |
Rotary Kiln Incinerator Structure:
1.The Rotary Kiln Incinerator uses mechanical or hydraulic catching
wheels. They are high accuracy and reliability. The ridding rollers
and tires are evenly wearing on the entire width direction and are
handy adjustment.;
2.The Rotary Kiln Incinerator head and tail uses elastic flake
radial contact sealing. It can fit the cylinder shape inaccurate
and kiln defle
3.There are 2 to 3 fulcrums on Rotary Kiln Incinerator. It is easy
to ensure the contact surface of rollers and kiln tires parallel to
the cylinder axis during installing;
4.There are specific gap between the tire and cylinder. It
strengthens the cylinder by confining tires after thermal
expansion;
Rotary Kiln Incinerator Advantages:
1. Combining patented technology: The traditional two combustion chamber is evolved into a two combustion furnace. The burnout rate of ash is improved. The combustion efficiency of rRotary Kiln Incinerator is improved. At the same time, it has the functions of slag discharging at normal temperature, crushing slag and sealing, locking air, etc.
2. Low cost: High temperature material contact refractory material.
Replacing lining is convenient;
3. Ensure that harmful gases do not leak: Good sealing measures and
furnace negative pressure.
4. Adaptability to incineration: Solid waste ,liquid, colloid, and
gas can be incinerated simultaneously.
