|
[China]
Trade Verify
Address: 15th Fl, Bldg No.13, National University Science Park(East), No.279, West 3# Ring Rd, Zhengzhou, China
Contact name:Andrew
Henan Zhengzhou Mining Machinery CO.Ltd |
|
Verified Suppliers
|
|
|
Dust Collection System for Clinker / Bag Filter Manufacturers
Dust Collector Introduction:
Bag filter is a kind of dry dust filtration device. Our company can provide design, manufacture, and installation one-stop service for bag filter. Our product range mainly include bag filter, single bag filter, pulse bag filter, mechanical reverse air bag filter, wet bag filter and bag filter parts.
Application of Bag Filter:
Electric power, metallurgy, chemical and building materials industry
Bag filter Structure:
Bag filter is composed of supporting structure, dust bucket, middle box, upper box, filter bag, frame, injection and clean device, PLC control system. Middle box has many compartment, when working, the air content dust will injected to each dust hopper, The big size dust will drop in the bottom of the bucket due to lower air speed and impact by bucket. The fine size dust will float to each bags, and separate at outside of the bags, then drop to the bottom hopper, the cleaned air will release air through the exhaust pipe.
Dust Collector Feature and Advantage:
1.New and advanced dust removing concept. No air pipe. Pulse valve is assembled at the side the chamber shell or top. No need to disassemble and assemble the air pipe when replacing the bags.
2.High performance pulse is applied to replace many smaller pulse to reduce the maintenance as much as possible.
3.Multi-chamber and off-line dust removing. Long life of filter bag.
4.Available for high density dust containing air collection, for example, O-Sepa separator, the dust content of which will reach 1000g/Nm3.
5.Air tank will reduce the pressure decrease caused by equipment.
Technical Data:
| Kiln type | Air volume(m3) | Filtration velocity (m/min) | Filter area(m2) | Equipment resistance(pa) | Bag size(mm) | Bag quantity | Cleaning method |
| ZM100 | 6000-7200 | 1-1.2 | 100 | 1200 | Φ130 | 100 | pulse cleaning |
| ZM120 | 7200-8840 | 1-1.2 | 120 | 1200 | Φ130 | 100 | pulse cleaning |
| ZM150 | 8000-10800 | 1-1.2 | 150 | 1200 | Φ130 | 100 | pulse cleaning |
| ZM200 | 12000-14400 | 1-1.2 | 200 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM250 | 15000-18000 | 1-1.2 | 250 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM300 | 18000-36000 | 1-1.5 | 300 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM350 | 21000-42000 | 1-1.5 | 350 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM400 | 24000-48000 | 1-1.5 | 400 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM450 | 27000-54000 | 1-1.5 | 450 | 1200 | Φ130 | 200 | pulse cleaning |
| Model | PPC128-6 | PPC128-9 | PPC128-10 | PPC128-2×6 | PPC128-2×7 | PPC128-2×8 | |
| Volume(m³/h) | 67300 | 100900 | 112100 | 134600 | 157000 | 179400 | |
| Air speed(m/min) | 1.2-2.0(Speed varies at different dust points) | ||||||
| Filtration area(㎡) | 935 | 1402 | 1558 | 1869 | 2181 | 2492 | |
| Net filtration area(㎡) | 779 | 1246 | 1402 | 1713 | 2025 | 2336 | |
| No. of bag(pc) | 768 | 1152 | 1280 | 1536 | 1792 | 2084 | |
| Resistance(Pa) | 1470-1770 | ||||||
| Minus pressure(Pa) | 7000 | ||||||
| Dust content at inlet(g/m³) | ＜1300 | ||||||
| Dust emission(g/m³) | ≤0.1 | ||||||
| Compressed air | Pressure(Pa) | (5-7)×105 | |||||
| Air consumption | 3.6 | 5.4 | 6 | 7 | 8.3 | 9.5 | |
| (m³/min) | |||||||
| Pulse valve | Qty(pc) | 12 | 18 | 20 | 24 | 28 | 32 |
| Size | 2-1/2″ | ||||||
| Elevation valve | Qty(pc) | 6 | 9 | 10 | 12 | 14 | 16 |
| Size(mm) | Valve Φ725,air tank Φ100 | ||||||
| Discharge device YJD-26 | Outlet 300×300mm Capacity 24m³/h | Double flap valve 305×915 | |||||
| Screw conveyor | Model | Dia. Φ300,capacity 21m³/h | N/A | ||||
| Gearbox | XWD2.2-5-1/43,power 2.2Kw | N/A | |||||
| Air slide | Air slide 250mm,flow rate 2.0m³/㎡, Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered. | ||||||
| Bag size and material | Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450g/㎡,temperature 120℃ | ||||||
| Insulation area(㎡) | 125 | 196 | 205 | 223 | 247 | 262 | |
| Total weight(approx.)(Kg) | 24120 | 31680 | 34680 | 43920 | 52680 | 60000 | |
| Note 1: Net filtration area means the area of one chamber during dust removing. | |||||||
| 2: The compressed air consumption is based on supply of compressed air pipe from an air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor. | |||||||
