|
Trade Verify
Address: 20F Zhongchuang Budg.,Times Commerce Plaza, 396 Tongjiang Ave, Changzhou
Contact name:June
Changzhou Junhe Technology Stock Co.,Ltd |
|
Verified Suppliers
|
|
|
Micro Emulsive Metal Cutting Fluid With Excellent Lubrication Performance
Metal Cutting Fluid brief
This product is oil liquid,belong to semi-synthetic micro emulsive cutting fluid,consist of mineral oil,lubricants,anti-rust agent,organic surface active agent and other additives.Suitable for processing cast iron, carbon steel, alloy steel, copper alloy, aluminum alloy, and is widely used in all kinds of machine tools, machining center of cutting, grinding process. Liquid supply for single machine and concentrated supply for central cooling system
Metal Cutting Fluid features:
1, General type cutting fluid, wide range of application
2, Microemulsive cutting fluid, excellent lubrication and cooling performance, water liquid treatment is easy
3, Excellent lubrication, cooling, cleaning and anti-rust performace
4, Products can improve the surface finish of workpiece, ensure the workpiece and machine tool online antirust requirements
5, Good corrosion resistance, foam inhibiting and emulsion stability of long service life, reduce maintenance costs
Metal Cutting Fluid Technical parameters
| Item | Quality index | Test method | ||||
15~35℃ Original solution appearance | Red brown oil liquid | GB/T6144 5.2 | ||||
| Diluent(5%) | Phase state |
Clear to microemulsion | Visual | |||
| pH | 9.0～10.0 | GB/T 6144 5.5 | ||||
Stability (15~35℃, 24h) | Soap | no | SH/T0365 appendixA | |||
| Oil | No | |||||
(15~35℃, 4h) Salt allowance | No phase separation | SH/T0365 appendixC | ||||
mL/10min Defoaming ability | ≤2 | GB/T6144 5.6 | ||||
55±2℃ Corrosion test,full immersion | 45# steel | 24h | GB/T6144 5.8 | |||
| Brass | 6h | |||||
| Red copper | 8h | |||||
| H62,Brass | 8h | |||||
35±2℃ Anti-rust test | First grade grey casting iron | Single piece | 24h | GB/T6144 5.9 | ||
| Lamination | 8h | |||||
Metal Cutting Fluid Instructions:
1, Recommended concentration:cutting:1:10~1:20; grinding: 1:20~1:25,Use concentration can be adjusted according to processing requirements
2, Use new fluid method: before using the new liquid, clean the storage tank and piping circulation, with 1%~2% concentration diluent (and adding bactericide ),at last add the productt evenly circulation can be used
3, Tank liquid supply or maintenance: when need supply tank need supply, should add water with corresponding percentage of original solution
4, Working liquid should be kept clean and ventilated, timely remove iron and oil and other impurities
5, If machine downtime for a long time, should air circulation and oxygen filling tank at least 2h/day.
Attention:
1, Machine tool should be complete filter, slag system, timely removal of scrap metal, oil slick and other impurities, if not many days to start the machine tool, if machine downtime for a long time, should air circulation and oxygen filling tank at least 2h/day.
2, Central fluid feeding and central cooling system, should be detailed operational procedures, that person is responsible for operation. maintenance and management.
3, Mixed with other brand cutting fluid is prohibited
4, This product should be stored in a dry, cool and ventilated inside storeroom, leakage should be avoided in the sun, rain, 5 ~ 35 ℃ storage temperature.If improper storage cause the product status changes, restore specified storage temperature after mixing, and then dilute liquid, does not affect the processing performance, can be used normally.
