|
Trade Verify
Address: 20F Zhongchuang Budg.,Times Commerce Plaza, 396 Tongjiang Ave, Changzhou
Contact name:June
Changzhou Junhe Technology Stock Co.,Ltd |
|
Verified Suppliers
|
|
|
Our for zinc flake coating surface hardness is low, defects in the
coating and acid and alkali resistant, draw lessons from domestic
formula technology, high-quality raw materials research and
production of JH-9320 zinc flake coating special self dry coating
liquid, both increase of zinc flake coating on surface hardness,
acid and alkali resistance, and can improve the anticorrosion
performance of the coating and with zinc flake coating affinity
good adhesion.
The main ingredient is water-base inorganic silica , mixed with
corrosion protection assistant.The product cost is low.
Technical Data
| No. | Item | Data |
| 1 | Color | Silver |
| 2 | coating thickness(μ) | First coating≥15 |
| 3 | non-volatile % | 30 |
| 4 | Adhesion≤ | 2 |
| 5 | Flexibility(mm)≤ | 3 |
| 6 | hardness | 0.7 |
| 7 | impact resistance(KG.CM) | 50 |
| 8 | wet and heat(h) | 240 |
Instructions and attention:
1. Dip coating,Spray coating etc.
2. It should be stirred fully befor usage; distilled water or
deionized water can be used to adjust viscosity ;Operating
viscosity:30-60s.
3. When the environment humidity higher than 85%,can add certain
industrial alcohol to adjust viscosity
4. Curing condition: 80℃/10min+140℃/30min.
5. Cleaning appliance: running water can be used.
6. Avoid acid substances, or polymerization and deterioration will
happen.
7. This product can be used alone,the coated surface request oil
free,dust free and dry, the better make pre-treatment of
degreasing,derusting,and phosphating.
Processing method:
A 1 base-coat+ 1 Top coat
B 2 base-coat+ 1 Top coat (heavy corrosion protection)
Process Parameter:
Dip Coating Temperature RT
Operateing Viscosity 45-60 S
Centrifuge 210~270 RPM/min 10s X 4-8 times
( Centrifuge device can not be mix used with spin dyrer )
Spray Coating Temperature RT
Operateing Viscosity 30~40 S
Curing: 80℃ 10min + 140℃ 20—30min
Corrosion protection of b process flow
Corrosion resistance: ≥1500h (NSS)
Sea water resistance: 25℃≥1500h
