Active Member
|
[China]
Address: 5-6F, Building 8, No.115, Lane 1276, Nanle Road, Songjiang District Shanghai, 201600 China
Contact name:Sherry Xiong
Shanghai Zhaohui Pressure Apparatus Co., Ltd. |
|
|
Single Flange Mounting YOKOGAWA Replacement Differential Pressure Transmitter PT124B-3504
Description
The diaphragm seal of PT124B-3504 differential pressure level transmitter is single flange mounting type , it is used to prevent medium from entering directly into the pressure-sensing assembly of the pressure transmitter. It is connected to the transmitter using capillary filled with fill fluid, such as silicon oil. The model PT124B-3504 can be used to measure liquid, gas, or stem flow, as well as liquid level, density and pressure. It outputs a 4 to 20mA DC HART signal corresponding to the measured pressure differential. The model PT124B-3504 also features remote setup and monitoring though communication with the model RST375 TERMINAL or RSM100 Modem. PT124B-3504 differential pressure level transmitter span ranges (non migration) is 0 to 1KPa to 2MPa, and the rated pressure of the liquid level flange is 1.6/4MPa, 6.4MPa, 10MPa, 150psi, 300psi or 600psi.
Feature
Adopts global leading high precision silicon
Strong anti-jamming performance
Accuracy +/-0.075%
Advanced stability and static pressure performance
Error less than +/-0.1%/10MPa
Internal integrated high sensitivity temperature transducer
Perfect thermal drift
Fast response time
Specification
| Measurement parameter | Differential pressure, liquid level |
Measurement range (Non migration) | 0-1KPa-2MPa |
| Accuracy | +/-0.1% |
| Wetted parts material | SS304,SS316L, Hastelloy C, tantalum, PTFE |
| Output | 2-wire 4-20mA, HART communication optional, linear output or square root output available |
| Ambient temperature limited | Lowest: depending on the filled liquid , Highest: 85℃ -20~65℃ (with LCD display, fluorine rubber O-ring) |
| temperature limited | -30~400℃ |
| Protection grade | IP67 |
| Electrical connector | M20*1.5 cable sealing buckle, terminal suitable for 0.5-2.5mm2 cable |
| Process connector | 1.5”clamp , DN25, DN50, DN80 customized |
