Home Companies Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd.

Medium Ampere Inductive Current Clamp , Current Clamp Probe 2.5 Meter Cable

Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd.
Active Member

Contact Us

[China] country

Address: Oriental HuaRui A, No. 150 Guanzhuang Road, Chaoyang District, Beijing, 100024, China

Contact name:Andy

Inquir Now

Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd.

Medium Ampere Inductive Current Clamp , Current Clamp Probe 2.5 Meter Cable

Country/Region china
City & Province beijing beijing
InquireNow

Product Details

 

 

Inductive Current Clamp on Laboratory Clamp for Medium Ampere

 

 

 

Introduction

 

The model Q125 current clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.

In electrical and electronic engineering, a current clamp. current probe is an electrical device having jaws which open to allow clamping around an electrical conductor. This allows measurement of the current in a conductor without the need to make physical contact with it, or to disconnect it for insertion through the probe.

 

 

 

Applications

 

1. Electric energy meter calibrator (on site)

2. Double clamp type ground resistance tester

3. Double clamp type phase volt-ampere meter

4. Digital multi-meter

5. Multi-function energy meter

6. Oscilloscope

7. Power quality analyzer

8. Matched instruments

9. Calibration instrument on site

 

 

 

Parameter

 

Electrical parameters
Ratio1000: 1 or 2000:1 (customized)
Accuracy class0.2%, 0.5%, 1%
Primary current0 - 3000A AC
Secondary current0 - 5A AC (customized)
Max. Cont. Input current3600A
Over voltage categoryCAT III 600 V
Output signal (AC current)500mA,1A,5A AC at nominal input current
Electrical parameters - continued 
Output signal (AC voltage)333mV,500mV,1V,5V AC at nominal input current
Frequency range40Hz-2000Hz
Dielectric strength3KV 50Hz/60Hz at 1 minute
Temperature range-20°C to +55°C
Output2.5 meter cable with D01 connector
Max. voltage not insulated conductors600 V
StandardEN 61010-1, EN 61010-2-032, IEC60044-1
InstallationClamp type
Output modeLead output (2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm)116 x 327 x 35
Weight (g)1200
Holding wire diameter (mm)φ120 x 50
Max. jaw opening (mm)50
Jaw colorWhite
MaterialPC+ABS+Polycarbonate, UL94 V0

 

 

 

 

Hot Products

LZZT620-10 resin cast Three phase bushing type Zero Sequence Current Transformer for protection ...
LZZT943-10 resin cast Three phase Zero Sequence Current Transformer for Ring cabinet and inflatable ...
150mm diameter 2000A/1A 5P20 Cast Resin Zero Sequence Current Transformer with IEC 61869-2 LZCK2501 ...
LZCG530-10 Protection relay device using 5P20 50/1A Zero Sequence Current Transformer Zero Sequence ...
LZCG530-10 Zero Phase Current Transformer, Ring net cabinet 5P10 Ratio 100A / 1A Zero Sequence ...
LZCK2500-10 120mm 50/5a Resin Casting Split core Protection Zero Sequence Current Transformer 5P20 ...