Active Member
|
[China]
Address: Oriental HuaRui A, No. 150 Guanzhuang Road, Chaoyang District, Beijing, 100024, China
Contact name:Andy
Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd. |
|
|
Q40 Ratio 500A / 500mA Split Core Amp Current Sensor for Metering
40mm 0.5 Class
The GFUVE Split Core Amp Current Sensor Q40-3 features 40 mm jaw
size and distinct jaw shapes which can hook around the conductor
easily. Q40-3 sensors are an excellent probe to be used in power
and low level current measurement applications.
A common form of current clamp comprises a split ring made of
ferrite or soft iron. A wire coil is wound round one or both
halves, forming one winding of a current transformer. The conductor
it is clamped around forms the other winding. Like any transformer
this type works only with AC or pulse waveforms, with some examples
extending into the megahertz range.
Clamp-on Current Transformer Current Clamp is a high-precision AC
current converter, and can meet a variety of measuring instruments,
It can be used along with many kinds of instruments and devices,
such as energy meter spot calibrator, multifunctional meter,
oscilloscope, digital multimeter, dual clamp Ground resistance
tester, dual clamp phase volt ammeter.
The GFUVE clamp-on current transformer is very popular with our
customers due to its fast and easy installation Produced with
amorphous silicon core or permalloy core, this product features
small size, high precision good stability and good
anti-interference This product is widely used for measuring power
and energy in the fields of electric power, communication and
monitoring system. Besides the high precision and the small phase
error this clamp-on current transformer can be used to measure a
wide variety of electric parameters without disconnecting the
exiting electric system.
Features
Measurement range of 1mA to 600A AC
Large jaw opening designed
Improved ergonomic design and easy operation
High content nickel metal core
Conforms to EN 61010, 600V CAT III
Low phase shift for power measurement
Designed for DMMs, recorders, loggers, oscilloscopes, power and
harmonic meters
UL, CE mark
Applications
Power quality measuring
Large industrial loads
Measuring around cable bundles
Power load monitoring
Waveform analysis
Energy meter calibrator
Parameter
| Electrical parameters | |
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.1%, 0.2%, 0.5% |
| Primary current | 0 - 500A AC |
| Secondary current | 0 - 1A AC or 0-5V AC (customized) |
| Max. Cont. Input current | 600A |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | 250mA,500mA,1A,5A AC at nominal input current |
| Output signal (AC voltage) | 250mV, 500mV, 1V, 5V AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 82 x 290 x 25.3 |
| Weight (g) | 500 |
| Holding wire diameter (mm) | φ40 |
| Max. jaw opening (mm) | 40 |
| Color | Black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
| Q40V1-500 | 500A | 600A | 1V | 1000:1 | customized | 0.2% |
| Q40V2-500 | 500A | 600A | 2V | 1000:1 | customized | 0.2% |
| Q40V4-500 | 500A | 600A | 4V | 1000:1 | customized | 0.2% |
| Q40V5-500 | 500A | 600A | 5V | 1000:1 | customized | 0.2% |
| Q40V10-500 | 500A | 600A | 10V | 1000:1 | customized | 0.2% |
Photos
FAQ, following questions will help you to select the matched probe
for your applications.
1. Please determine if you are measuring AC or DC?
GFUVE Q40-3 is for AC metering.
2. What is the maximum current you will measure?
Q40-3 has 600A as max.
3. What size conductor will you clamp onto? This parameter
determines the probe jaw size needed.
Q40-3 conductor diameter is 40mm
4. What type of probe output do you need or can you work with (mA,
mV, A, AC, etc.)?
Q40-3 can customize output with Ampere, Volt.
5. What is the working voltage of the conductor to be measured?
GFUVE probes should be used below 600 volts
6. What type of termination do you need: jacks, leads or BNC?
Q40-3 standard has 2.5meter leads. We can offer jacks or BNC… as
options.
7. If you cannot find information you need or would like
assistance, contact us today. We have designed many more probes
than those shown in this catalog, and we manufacture in Beijing,
China.
