YEM313DS Factory Single Phase Digital Electronic Watt Hour Energy Meter

Model YEM313DS single phase electronic front board installed active energy meter is a

kind of new style single phase two wire active energy meter, it adopts micro-electronics

technique, and imported large scale integrate circuit, uses advanced technique of

digital and SMT techniques, etc. The meter completely accords with relevant technical

requirements of class 1 single phase active energy meter stipulated in international

standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active

energy consumption from single phase AC electricity net, it is used for setting indoor or

setting out door directly, and this meter has seven digits LCD displays to show the

active energy consumption. And there is a maintenance-free lithium batteries in it, used

for displaying power cut reading. It has following features: good reliability, small

volume, light weight, specious nice appearance, convenient installation, etc.

1. Front board three fixed installation, the cover is made of PC material which is transparent and anti-UV molded overall, the bottom and the terminal of the meter are made of black glass fiber which can fire-retardant and enhanced PC material, and the IP rating up to IP56. It has following features: good weatherability, anti-impact, good insulation performance, specious appearance, etc.
2. Standard configuration the bottom and the terminal of the meter are closed by the screw of the meter, may select the bottom and the terminal of the meter are closed by ultrasonic. (Please specified when ordering).
3. Seven digits display LCD, standard configuration 6+1 digits display (999999.1kWh,). May select 5+2 digits display (Please specified when ordering).
4. There is a maintenance-free lithium batteries in it, use for displaying power cut reading.
5. Standard configuration one port of pulse output passive(polarity),May select increase a distant port of pulse output passive (nonpolarity). And contact with all kind of AMR system conveniently,Complying with standard IEC 62053-31 and DIN 43864.
6. Two LED instructions respectively power supply state (green) and signal of energy impulse (red).
7. Automatic detection the direction of the flow of load current. And Instructions on individual LED. (Only yellow energy impulse signal when working, that is meaning the direction of the flow of load current reverse).
8. Single direction single component measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
9. Direct connect operation, there are two types wiring you may select. Standard configuration type 1B wiring, may select type 1A wiring (Product Configuration code is DS).
10. Standard configuration extension terminals cover, in order to protect to use safety, may select short terminals cover. (Product Configuration code is MC).