Home Companies Qingdao Jerryborg Marine Machinery Co., Ltd

Impact Resistant Polyethylene Floating Marine Marker Buoy

Qingdao Jerryborg Marine Machinery Co., Ltd

Contact Us

[China] country

Trade Verify

Contact name:Brunhilde Lung

Inquir Now

Qingdao Jerryborg Marine Machinery Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Impact Resistant Polyethylene Floating Marine Marker Buoy

Country/Region china
City & Province qingdao shandong
Categories Aquaculture Traps
InquireNow

Product Details

Marine Marker Buoy Floating Type Customized Mooring Buoys For Ship And Boat

 

 

How To Use Marine Marker Buoy Correctly

 

It’s important to use a marine marker buoy correctly to prevent unnecessary wear and tear on the mooring system, as well as protect your vessel and the vessels of others. There is no fee to use the reef marine marker buoys maintained by the sanctuary, but there are marine marker buoys in anchorages throughout the Keys that do charge a fee.

  • Buoys are available on a first-come, first-served basis.
  • Steer the boat from a helm station that enables you to see the buoy during the entire hook up.
  • Approach slowly from downwind or down current, so that the floating yellow pick-up line is closest to you. Keep the buoy on the same side as the helm station so you can see it as you approach.
  • Safely retrieve the yellow pick-up line with a boat hook. Put your vessel in neutral to avoid entanglement.
  • Run your boat’s bow line through the loop of the yellow pick-up line. Cleat both ends of your bow line to the bow of your boat. Never tie the yellow pick-up line directly to your boat as it puts undue stress on the mooring anchor. Never stern tie to a buoy either as this is both dangerous to you and your boat, but also puts undue strain on the mooring system.
  • Let out enough line so that the buoy is not pulled underwater and the line is horizontal. Rougher days may require even more lines. Adding an extra line will produce a more comfortable experience for your vessel while moored and reduce wear on the buoy system.
  • Inspect the buoy your boat is tied to; you are responsible for your vessel. Check that it is holding as intended and report problems to any of the sanctuary offices.
  • When you are ready to leave, un-cleat your boat’s bow line and pull it through the loop of the yellow pick-up line. Then back well away from the mooring so you do not foul in any of the mooring lines.

 

 

Additional Attention Points of Marine Marker Buoy

 

  • At many reefs, marine marker buoys encircle the shallowest reef areas or are located on the ocean side of the reef. Approach marine marker buoys from around either side of these shallow areas, always steering to the outside of a ring of buoys. Never motor directly across a shallow reef to get to a buoy.
  • You should maintain idle speed/no wake in the vicinity of the marine marker buoys. Do not meander among the buoys and watch for swimmers, snorkelers, and diver bubbles.
  • If there are no buoys available, anchor only in sand, never in coral. Always check to be sure that your anchor is not dragging and your anchor chain is not contacting coral.
  • Smaller boats are encouraged to tie off to one another, thereby allowing larger vessels access to buoys.
  • Sailboats should not leave up large sails as steadying sails when on a buoy; this puts too much strain on the mooring’s eyebolt.
  • Buoy locations have been spaced to provide clearance for most boats when tied up during normal conditions. To avoid grounding, use caution when approaching and while tied to a buoy. Larger-than-average vessels must check depths so that contact with the bottom is avoided.
  • Florida Keys National Marine Sanctuary assumes no liability for use of the buoys.

 

 

Advantage of Marine Marker Buoy

 

  • Tough, impact-resistant polyethylene plastic (HDPE/MDPE/LLDPE)
  • Built-in UV inhibitors reduce degradation caused by sunlight
  • Handholds to ease Pipe Float installation
  • Molded-in bolt holes allow for easy float installation
  • Floats are available with or without foam cores
  • Solid one-piece construction

 

Specification of Marine Marker Buoy

 

Diameter(m)
Length(m)
Energy Absorption(KJ)
Reactive Force(KN)
1.0
1.5
40
226
1.0
2.0
56
321
1.2
2.0
79
371
1.5
3.0
191
724
1.7
3.0
238
796
2.0
3.5
385
1094
2.5
4.0
829
1725
2.5
5.5
1165
2513
3.0
5.0
1313
2538
3.0
6.0
1644
3110
3.3
6.5
2130
3647

 

For further information free to contact us.

Hot Products

Pneumatic Fenders Yokohama Type With High Energy Absorption Pneumatic Fenders Description Pneumatic ...
Anti-aging Natural Pneumatic Boat Fender For Ships Pneumatic Boat Fender Pneumatic boat fender is ...
Pneumatic Marine Rubber Fender ISO 17357 Standard Pneumatic Marine Rubber Fender Pneumatic marine ...
Floating Yokohama Type Fender Marine Pneumatic Bumper Marine Pneumatic Bumper Description Marine ...
EU ABS Yokohama Rubber Fender for Tugboat High Performance Docking Fender Fender Fender is an ideal ...
BV CSS GL Yokohama Rubber Fender High Pressure Mooring Fender Yokohama Rubber Fender Jerryborg ...