6pcs Solar Mason Jar Lid Lights factory 10/20/30 LED CoolWhite for Wedding Patio Garden Party Decorations

• PERFECT MATCH - Fit for most regular mouth mason jar,regular mouth, Lid 2.76""(70mm)/Insert 2.17""(55mm). Auto on and off with light sensor. Slid the switch to “ON”, the lights will automatically turn on when light low, and turn off in daytime
• ENERGY SAVING SOLAR DECORATIVE LIGHTS - with 1.2V 600mA AAA rechargeable battery. Put the ON/OFF switch to ON for solar charging, and expose the solar board to sun light before first use for full charge (about 5-6hours)
• HIGH-QUALITY WATERPROOF DESIGN - An rubber gasket pinches on the lid to ensure the water won’t get into the jar and protect the battery. The solar charging board is also waterproof, ideal for front porch and tree lanterns
• EASY INSTALLATION - No need wire, really eco-friendly, save electric bill. Good idea for indoor and outdoor decorations like garden/patio/deck/wedding/party/Christmas/holiday and other festival or occasions
• DIY YOUR OWN MASON JAR CRAFTS - Shape the silver string lights as you like and fill mason jars with fruit, sand, dried flowers, shells, pebbles, berry sprigs, seasonal things etc. Let everybody around you give a thumb up for your idea

• Perfect Match - Solar powered Mason Jar Lid Lights(30 LEDs)(Jars Not Included) , Fits for most regular mouth mason canning jars,Lid Diameter Size: 2.76 inch(70mm)/Insert 2.17 inch(55mm). Promise:You will receive the products within two weeks. Because of Corona many people are in troubles. We are trying our best to serve customers.And We hope our products can bring you joy and happiness.
• It is very convenient to use, just put them in the outdoor direct sunlight, automatically turn on/off, the light will be on in the dark, and the daylight will turn off automatically. Each lamp has an on/off switch under the cover that opens before solar charging. It takes 6-8 hours of charging time on sunny days and lights up for about 8-12 hours.
• Environmental Protection and Energy Saving: 100% solar powered solar panel, requires no external wiring, so it's easy to get it all set up.Suit for Any Regular Standard Mouth Mason Jars
• The very popular Mason jar string fairy firefly lights, let you drop the Mason jar into a beautiful light, suitable for the decoration around your apartment. Hanging anywhere, like a terrace, garden, bedroom, and party, wedding, Christmas, warm white, easy to create a warm atmosphere for the family.
• Weatherproof: Advanced rustproof metal Designed to withstand sunny days, rainy nights, and small snowy days.If you have any questions with these solar landscape lights, please contact us, we would be more than happy to assist.

A Quick and Easy Mason Jar Solar Lights DIY Project

What You Need to Make Mason Jar Solar Lights:

Solar light (the stake kind) $1 each at Dollar Tree

Mason jar with lid

Sticky foam tape

Step 1. Remove Stake Piece of the Light

First, remove the stake piece of the solar light so you are left with the top solar panel piece. In my case, I kept the plastic casing around the light because it has a metal reflector that helps intensify the brightness of the lamp.

Next, remove the stake part of the light and it should just slide right off. You’ll be left with the solar panel and light component. I also kept the plastic casing around the LED.

RELATED: Brighten Up Your Home With This DIY Mason Jar Lights

Step 2. Slide the Solar Light Through the Ring & Keep It Snug

Now, grab the jar and unscrew the lid. Remove the lid from your jar, then wrap the foam tape around the solar light.

Next, remove the flat part of the lid and only keep the ring. The top part of the solar light should slide through the ring nicely with a little bit of snugness.

[cm_ad_changer campaign_id="10"]

In order to make sure the light doesn’t fall down into the jar, you’ll need to put the foam tape around the top of the light. This will keep it snug.

Step 3. Squeeze the Light into the Center of the Lid

Squeeze the light into the center of the lid so it’s almost flush with the top of the jar. Once you’ve put a single layer of tape around the light, slide the light back into the ring.

Do this until the top of the solar panel is flush with the top of the lid.

Step 4. Screw the Lid onto the Jar

The last thing you have to do is screw the lid onto the jar and your first solar light is complete!

FAQ:

Q: How should I submit artwork and what format?

A: You can submit artwork to us by Email or upload your artwork to our FTP.

We accept: COREL DRAW, ILLUSTRATOR, COREL PHOTO PAINT, PHOTOSHOP,

TIFF,. JPEG,. GIF (tiff at 300dpi, jpeg at 300dpi, gif at 600dpi 100%size)

PDF (vectors in PDF, if using raster program make sure you have high res at 100%size.)

Q: What are setup costs?

A: Set up costs most often apply to new graphics. The first time you order and have a two color print to it, we charge a one time

fee for two screen charges. If you are an existing customer and you want to a NEW graphic the same rules apply. Set up fee for

normal deck heat transfer graphic: USD160 unlimited colors. For longboard transferr graphic USD320 unlimited colors.

Q: Can I order samples?

A: Absolutely, we send requested samples at a minimum charge. You will have to pay shipping cost and samples fee,

the samples fee will return back to you after you place your order. New customers must email us the following information.

Company or shop name, Address, telephone No. specific boards.

Q:When is your delivery time?

A:It depends on product and order QTY.

Normally,it takes us 25 days after receiving the deposit,Repeat order only need 15-20 days.

Q: What is the loading port?

A: Regularlly Ningbo or Shanghai

Q: Do you provide OEM developing services?

A: Yes,we have plenty experience in OEM developing, aslo for famous brands,