Wolves Team Limited |
Verified Suppliers
|
|
Most of us know that in important places like prisons, military meeting and museums, actions have always been taken to prevent the message from being given out. What kind of device can install in these places to reach the purpose, the Rackmount High Power Cell Phone Signal Jammer must be the one which is most suitable.
A big merit of this rockmount high power cell phone signal jammer
is that each band can adjust RF power output level or turn off
without influencing the other bands' operation. The original
antenna is external double channel directional panel antennas and
you can select antennas to provide more flexibility regarding
jamming coverage. The jamming coverage of this jammer is so strong
that the jamming range could reach 500m, but the jamming range is
also determined by the strength of signal in given area.
Seen from its function this one jamming device is really a good
one. If you are looking for one, come here! High quality and
reasonable price is our promise.
Advantages and Features
• Aluminum-alloy casing with high protection has high resistance to
dust, water and corroding.
• Heat sink designing combing with the fans to make system in a
cooling status.
• Special technology to prevent interference between each frequency
band.
• Only interfere downlink frequency of mobile system, without
disturb normally working of Base Stations.
• Frequency bands and output power selectable.
• Each frequency band controlled by independent RF ON/OFF switches.
• Power of each frequency band can be adjustable independently.
• Circuit protection to ensure system will not burn out in case of
antenna short circuiting or disconnection.
• Antenna type options, directional or Omni-directional antennas
option.
• Easy operation and installation.
• Keep for upgrade module installation.
• Working 24 hours/365days continuously.
Specification:
Output Interface | Output Frequency | RF Output watt |
CH1 | CDMA/GSM: 851-960MHz | 50-100W |
CH2 | DCS: 1805-1880MHz | 50-100w |
CH3 | PCS: 1930-1990MHz | 50-100w |
CH4 | 3G: 2110-2170MHz | 50-100w |
CH5 | 4G LTE:(USA:725-770MHz) or (Europe:790-826MHz) | 50-100w |
CH6 | 4G Wimax:(USA:2345-2400MHz) or (Europe:2620-2690MHz) | 50-100w |
CH7 | 5G: 3200-3600MHz /3600-3800MHz | 50100w |
Total output power | 500W | |
Jamming range | up to 500m,still depends on the strength signal in given area | |
Jammer Module Number | 7 | |
External double channel directional panel antennas | all the TX frequency covered down link only | |
Power supply | 50 to 60Hz, 100 to 240V AC | |
With AC adapter | (AC100-240V-DC27V) | |
Dimension | 420×480×230 mm |
Accessories
The network control program and the management of the Jamming device:
The control software should be able to read and transfer all alerts from the Jamming devices to Control Computers. The Control Computer shall connect and monitor more than 5000 Jammer devices and shall perform the following: