Hollow Out Non - Mechanical Watch Initial Quartz Watch Automatic
Quartz Watch
Introduction
The hollow shape is used as the material, and the texture of the
diamond-shaped faceted table mirror of the watch is expressed with
fashionable machinery to create a watch with visual impact. The
overall look is fashionable and cool.
Basic parameters
Inner packing | PP bag+bubble bag |
outer packing | carton |
dimensions | 50*27*28cm |
MOQ | 500pc |
Port | ShenZhen/HK |
Lead Time: |
Quantity(Pieces) | 1 - 10000 | >10000 |
Est. Time(days) | 40 | To be negotiated |
Table mirror: | mineral high definition table mirror |
Watchband: | stainless steel watchband |
Table buckle: | folding buckle |
Features
1. Fashionable hollow dial, mechanical style, fashionable and
dazzling shape, showing unique charm
2. Original quartz movement, with fashionable mechanical gear
design, accurate timekeeping, stable performance and higher
precision
3. Exquisitely carved bottom cover, cool mechanical style,
luxurious rhythm, different temperament
4. Mineral-strengthened glass mirror, high-definition visibility,
wear-resistant and scratch-resistant
5.3 ATM life waterproof, meeting the waterproof problems of daily
face washing and hand washing
6. Luminous pointer display, allowing you to easily grasp the time
even in the dark
Picture
How to wind a non-automatic watch
Regardless of whether it is an automatic mechanical watch or a
manual mechanical watch, the winding of all mechanical watches
obeys one rule: turn the surface upwards and face the front at 12
o'clock. At this time, the crown is usually in the right hand.
Rotating the crown from the bottom to the top is the winding.
Automatic Mechanical watches can also be wound in this way. To
If you confirm that your watch is guarded in this way, and you
won’t go when it is fully loaded, and turn it in the opposite
direction for a few times, it should be because you are winding too
slowly. If the winding is too tight, it will cause the mainspring
to jam and the watch will not move. Now, don’t screw it hard next
time until it can’t be screwed. To
If it's not that you screwed it too tightly, or that is the case,
there is a problem with the watch barrel and it needs to be
repaired. To