|
[China]
Trade Verify
Address: 88 Meters North of Mingshan Village, Fuqian Street, Zaoyuan Street, Zhangqiu District, Jinan City, Shandong Province, China
Contact name:Amy
Shandong Jinzhao Machine Co., Ltd. |
|
Verified Suppliers
|
|
|
Electricity Rotary Dryer Industrial Manual Control System Drum Dryer Machine Working principle:
Wet raw material is transported into the dryer by belt conveyor or bucket elevator, because the cylinder is in inclined state for slow rotary movement, so the material in the axial direction from high to low-end movement, in the process of movement, the lifting plate continuously raises, scatters and moves down the material in the cylinder, thus making the material and the high-temperature flue gas carry on the full heat exchange until the drying reaches the specified requirements, the dried material is discharged from the output by discharging device. The waste gas from the dryer end will be discharged by cyclone.
Electricity Rotary Dryer Industrial Manual Control System Drum Dryer Machine is combined with heating furnace, input port, rotating cylinder, delivery pipe, dust collector and output port. Wet materials are continuously sent to the drying cylinder by a conveyor. Heat air full contact with the material sucked by fan blower installed in the end of dryer. Being transported and scattered by the high-speed hot air, water in the raw material is evaporated and discharged by cyclone. The material gets fully dried in the rotating cylinder.
The dryer is provided with a circumferential lifting plate combination device at various angles inside the cylinder body, which can greatly increase the heat exchange rate and shorten the drying time, can be widely used in river sand, slime, bauxite, clay, slag, fly ash and other materials drying. GHG dryer is widely used in industries like biomass fuel, wood pellet fuel, sawdust briquette, farming etc. The applicable materials are wood powder, wood shavings, sawdust, wood chips, straws, grass, etc.
The drying body of industrial rotary dryer is composed of cylinder body, ring gear and rolling ring. The drying body is on the tug rolling device and block rolling device supported by front and back rolling ring. It can control axial direction traversing of drying body by adjusting tug rolling device and block rolling device. The driving device drives drying body rotating through the ring gear. Electric motor (frequent) as the power can achieve stepless speed adjusting and meet the demand of different rotating speed.
GHGΦ1.0×12×1 has a power of 4kw and an evaporation capacity of 0.1 to 0.2 t/h.
GHGΦ1.2×12×1, on the other hand, has a power of 5.5kw and an evaporation capacity of 0.2 to 0.45 t/h.
Another variant is GHGΦ1.5×15×1, which has power of 11kw and a evaporation capacity of 0.5 to 0.7 t/h.
GHGΦ1.6×18×1 power and evaporation capacity are the same at 11kw and 0.7 to 1.1 t/h.
For GHGΦ1.8×20×1, the power is 15kw and the evaporation capacity is 1 to 1.3 t/h. GHGΦ1.8×24×1 follows with 18.5kw power and 1.2 to 1.5 t/h evaporation capacity.
The power of GHGΦ2.0×24×1 and GHGΦ2.2×24×1 are the same at 18.5kw, but the latter has higher evaporation capacity at 1.7 to 2.5 t/h.
GHGΦ2.5×24×1 has 22kw power and an evaporation capacity of 2.5 to 3.2 t/h.
GHGΦ2.8×24×1 is at 22kw power and 3 to 4 t/h evaporation capacity.
Lastly, GHGΦ3.0×24×1 has power of 30kw and evaporation capacity of 3.5 to 4.5 t/h. GHGΦ3.5×24×1 meanwhile has 37kw power and 4.5 to 6.5 t/h evaporation capacity.
The Electricity Rotary Dryer Industrial Manual Control System Drum Dryer Machine is perfect for industries that need to dry materials such as wood sawdust, wood chips, wood shavings, and other materials. It is a drum dryer machine that uses rotary dryer technology to effectively dry the materials. This drum rotary dryer has a capacity of 1000kg/h and is made of stainless steel or carbon steel. It can use direct or indirect heating methods to ensure efficient and accurate drying. Moreover, it comes with a 1-year warranty to ensure reliable and safe usage.
The Jinzhao GHG Wood Sawdust Dryer is perfect for woodworking businesses, sawmills, and other wood processing facilities. It is easy to operate and is designed to deliver fast and accurate drying results. It is also ideal for drying sawdust, wood chips, and other wood-based materials. Additionally, it has a durable construction that ensures consistent performance and long-term usage.
The Jinzhao GHG Wood Sawdust Dryer is a reliable and efficient drying solution for industries that need to dry materials. It is durable, easy to operate, and comes with a 1-year warranty. Moreover, it is made of stainless steel or carbon steel and can use direct or indirect heating methods for efficient and accurate drying.
Wood Sawdust Dryer Technical Support and Service:
The wood sawdust dryer is securely packaged in a high-quality wooden crate with the following specifications:
The wood sawdust dryer will be shipped with a reliable international courier service. The delivery time will depend on the destination.
