Round Log Wood Band Saw Cutting Circular Sawmill Sliding Table Saw
Machines
Saw blade layout for up and down single saw, the use of large size
saw blade, and with a scraper, up and down saw blade saw road
smaller, saw cutting accuracy, reduce wood waste. The saw surface
is smooth and smooth, avoiding the phenomenon of saw bending and
digging, and the products are smooth and standard without going
through the planer, which can replace the band saw machine.It has
the advantages of reasonable structure, beautiful shape, high
efficiency and energy saving, environmental protection,safety and
reliability, and is very suitable for jointing board, finger board,
wood line, plate and square material processing. It is the
equipment of construction, furniture, wood, processing and other
industries.High precision sawing, according to the need to adjust
the sawing size, and can be adjusted according to the size of the
sawing into specification wood or wood, wood or plate finished
surface smooth, no need to plane.
Daily maintenance:
1.Regularly adjust and check the feed chain, feed motor chain and
navigation motor inside the log multi-blade saw.
2.Check regularly whether the length and tightness of the main
motor belt is moderate, add oil regularly to the oil cup of the
box, and check whether the oil pipe has been properly connected to
the port.
3.The cushion cover, saw blade, navigation blade should be cleaned
regularly (3~5 days) with diesel oil, wipe clean with a clean
cloth, installation can not have debris, to clean, and then wipe
clean with a cloth.
4.The spindle core should be used every day to flush the hole with
water when replacing the log blade saw, or to blow the air with the
air gun at the most inner outlet to blow the dirt out and ensure
that the outlet is smooth.
5.Check regularly whether the spindle nut inside the log
multi-blade saw machine is loose.
