|
[China]
Trade Verify
Address: NO.21, UNIT 2, BUILDING 36, NO. 52 XUCHANG ROAD, SHANGJIE DISTRICT, ZHENGZHOU, HENAN
Contact name:Bella Zhao
Henan Bedo Machinery Equipment Co.,LTD |
|
Verified Suppliers
|
|
|
80-200 Mesh Bamboo Wood Powder Making Machine CE Approved
The vertical Wood powder making machine uses grinding wheels to grind, and uses the ultra-fine powder method of impact, squeeze, and roller grinding to grind the wood to below 300-500 mesh. It is Chinese advanced wood mill processing equipment.
The grinding device adopts overlapping multi-stage sealing, all
fine powder can be recovered, and the equipment is clean and
environmentally friendly. The periphery of the host adopts a
water-cooling cycle to ensure that the machine can run continuously
for 24 hours.
The finished product ranges from 60 to 500 meshes, equipped with a
professional impeller governor, and the particle size of the
finished product can be adjusted without stopping the machine.
The Wood powder making machine can grind spice wood, bamboo, Chinese herbal medicine, pearls, chemical raw materials and others into powder. It is a high-quality processing machine for chemical, pharmaceutical, breeding, food, incense, and mosquito-repellent incense materials.
| Material | Time(hour) | Fineness (mesh) | Capacity(kg) | Screening rate (%) | Humidity(%) |
| Poplar sanding powder | 1 | 80 | ≤320 | ≤98 | ≤15 |
| Poplar sawdust | 1 | 80 | ≤270 | ≤98 | ≤14 |
| Thorns | 1 | 80 | ≤270 | ≤98 | ≤15 |
| Pine sawdust | 1 | 80 | ≤280 | ≤98 | ≤15 |
| Cypress sawdust | 1 | 80 | ≤280 | ≤98 | ≤18 |
| Dried cypress branches | 1 | 100 | ≤220 | ≤98 | ≤13 |
| Sticky wood | 1 | 90 | ≤220 | ≤98 | ≤10 |
| Wheat bran | 1 | 140 | ≤170 | ≤98 | ≤8 |
| Cassava residue | 1 | 150 | ≤160 | ≤98 | ≤20 |
| Bamboo powder | 1 | 150 | ≤170 | ≤98 | ≤15 |
1. It can process wood, leather, food, medicine and other materials, and the finished product can be 40-500 mesh.
2. There is a fineness analyzer in the body. After loosening the bolts on the analyzer, move upwards to increase the fineness and downwards to decrease the fineness.The output fineness can be adjusted at any time.
3. There is an iron separator inside, which can automatically adsorb metal blocks to prevent the metal from wearing inside the machine and improve the safety production factor.
4. The wheel is made of H13 alloy material, which has high
toughness and good wear resistance. The machine can work
continuously for 24 hours.
5. Under the action of high-pressure centrifugal force, the
grinding force is increased by 60-80%, and the output is
150-300%higher than that of the hammer mill. In the case of the
same output and fineness index, when crushing wood chips, the
energy consumption is 3/2 lower than that of the hammer mill.
Q1:Before the equipment leaves the factory, we will provide you
with these services:
1. We will conduct a comprehensive test on the machine, and there
will be obvious safety warning slogans in the position of the main
parts of the machine. Such as filling hydraulic oil, equipment
rotation direction, etc.
2. After the machine is loaded into the container, all accessories will be packed into a wooden box, and the installation serial number and the shipping list will be marked.
3. The photos when the machine is loaded will be sent to you. And
prepare installation video and safety manual for you while the
equipment is working.
Q2:How long is your delivery time?
If there is stock, it usually takes 5-10 days. It takes 20-30 days
to customize the equipment according to your requirements.
