|
[China]
Trade Verify
Address: North of the Centre road,Anping,China
Contact name:
Anping Success Wire Mesh Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Pneumatic Reinforcing Mesh Welding Machine / Wire Mesh Welding / 2050MM Width
The working process
1. Feeding: Cross wire & Line wire are both pre-cut wires. Cross wires are feeded to the mould manually then the wire falling autoamticlly, while line wires are automatically feeded by the servo motor.
2. Welding: The main machine starts welding and adopts a
synchronous control technology, both branch control welding time
and welding time are controlled by a PLC digital programming
system, and the pore size can be adjusted only by direct input on a
touch screen control panel; welding power is pneumatic, and welding
pressure can be easily and intuitively adjusted.
3. Welding finish: The servo motor controls an automatic mesh
drawing process until the whole mesh is welded, and the automatic
mesh connecting and discharging system is started; the welding of
the next mesh is started.
Technical parameters
| Wire diameter | 5mm-12mm | Warp feeding | Pre-cut |
| Weft distance | Min. 50mm | Weft feeding | Pre-cut |
| Warp distance | 100mm-300mm | Power supply | AC380V-440V |
| Warp quantity | 26 | Welding width | 2500mm |
| Mesh length | 12m | Welding speed | 45 times/min |
| Dimensions | 10*3.4*1.8(m) | Welding capacity | 12mm+12mm |
.
Accessories
1. air tank
2. air compressor
3. wire straighting and cutting machine
4. bobbin
