|
[China]
Trade Verify
Address: North of the Centre road,Anping,China
Contact name:
Anping Success Wire Mesh Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Common Used Steel Wire Drawing Machine / Nail Wire Drawing Machine
Pulley Continuous Wire Drawing Machine
1. This wire drawing machine is used to draw iron, copper, aluminium wires, mainly for mesh weaving, construction, galvanization, or supply for the wire drawin of water tank.
2. This wire drawing machine includes 2 drum-uint,3 drum-uint, 4drum-unit, 5drum-unit.
Main Technical Parameters
| Specification | Drawing Passes | Maximum Inlet Wire MM | Minimum Outgoing Wire MM | Motor Power KW | Speed M/S | Drive Mode |
| 650 | 1-4 | 8.00 | 4.00 | 22-15 | 2 | Gear Drive |
| 560 | 1-7 | 6.50 | 2.00 | 22-11 | 6 | Gear Drive |
| 450 | 1-7 | 3.50 | 1.20 | 18.5-15 | 7 | Gear Drive |
| 400 | 6-8 | 2.50 | 0.80 | 11-15 | 18 | V-belt Drive |
| 360 | 1-7 | 2.50 | 0.60 | 11-7.5 | 8 | Gear Driv |
Water Tank Wire Drawing Machine
Our water tank wire drawing machine is used for drawing low, medium and high carbon steel wire, stainless steel wire, prestressed wire and alloy steel wire and suitable for cord steel wire, rubber tube wire, spring wire, temper type wire, gas shielded welding wire and stainless steel wire.
| Maximum Inlet Wire | Ф6.5mm |
| Minimum Outgoing Wire | Ф3.5mm |
| Single Motor Power | 90Kw 6 Stage Slip Ring Motor |
| Gross Weight | 6T |
| Drawing Passes | 8 Passes |
| Speed | 5m/second |
| Total Compression Ratio | 80% |
| Average Partial Compression Ratio | 15% |
