Active Member
|
[China]
Address: ADD: Postcoade 053600 B125-B135 Ziwu Indutries Zone Zi Wen Town Anping County Hengshui Heibei Province China
Contact name:Frank.Zhang
Top Fencing Co.Limited |
|
|
coated : akso -noble power coated
color : black, iron-red, golden &black ,optional
shape :lumber round ,eliptic ,square
Advantages:
1. assemble easily and quickly, eco-friendly, no welding design
2. decorative and colourful
3. four layers processing to keep it from rusting, cracking in a
short time, and the colour ratio won't change more than 5% for 15
years
4.shape and thickness and other request are customized
Manufactory | LN |
Material | zinc alloy steel |
Surface | Akzo Nobel powder spraying on the surface |
Feature | 4-layer processing to anti-rust, antioxidant, ultraviolet-proof, 20 years quality-ensured |
Detail Size(mm) | Thickness: 0.8, 1.2, 1.5, 2.0 and others available. |
Height:: 1200 ,1500, 2000 and more. | |
Vertical column: 16*16, 19*19, 25*25, and others available. | |
Horizontal column: 32*32, 35*35 40*40 45*45 and others available. |
*Special specification could be customized. Any questions, please
feel free to contact us!
Pre-treatment processing
Pre-treatment processing refers to a set of processing including
alkali washing &derosination, weak acid surface adjusting,
phosphating &film and washing spray that carried out to the
base at the end of metal processing but before electrostatic spray.
Destination--It is a saponification reaction of alkaline metal
absorbent and Stearic acid in the metallic surface oil, which forms
Sodium stearate and glycerol. Grease is fully dissolved in alkaline
solution, this can remove oil.
Surface adjusting--To change the microscopic state of the metal
workpiece surface to prepare for phosphorization. The surface of
the workpiece adsorbs a large number of crystal nucleation and
phosphating growth points in a short time and low temperature so
that the surface activity of the workpiece is homogenized.
Phosphorization--To protect matrix metal,preventing metal corrosion
in a certain extent; to be used as priming before spry,improving
the adhesion and corrosion resistance of the coating layer; In the
market, many manufacturers use the passivated of raw materials,
without any pre-processing, they are sprayed immediately after
metal processing, resulting in poor adhesion between the coating
layers and the base surface. After using more than 1year, the
powder and coating will drop out.
FAQ:
1: Can I negotiate the Prices?
Yes, to some extent, prices depend on the amount of your order.
2: Do you provide samples?
Yes, we can supply samples for test
3: OEM Capability:
All OEM orders are welcome. We import equipment of German TUDE
COMPUTER-CONTROLLED flow line protection.
4: Can I visit you?
Sure, we are near to Nanjing airport, less than 90 minutes' drive.
If you would like to visit our factory, please contact us before
your arrival.
