Top Fencing Co.Limited |
|
lN Co-design and manufactured temporary fencing panels comply standard AS4687-2007 we take a classical height 2100mm and a 2400mm width, fill mesh diameter is minimum 3.80-4.00mm ,temporary fencing panels are all fully hand welding provided an optimum strength ,outer tubing 32mm are pre-galvanized 14 microns or full hdg 42 microns ( available full hot dipped galvanized not under stock) the infill mesh as all know that 60mm*150mm always prefer by NZ local resale market
Applicable sites:
LN co are familiar with Australia and New Zealand through 11
years experience accumulated take this advantage we are always
given the right solutions of temporary fencing, when there are
customers ask us what is exactly service life you fencing panels
,actually this is very hard questions to answers cause in climates
anything is possible but yes ,we can say what is good products and
if no force majeure affections and most cost-performance one as an
elder temporary fencing company we recommend 42 microns temporary
fencing panels, 42 microns is standard thickness of hot dipped
galvanized which was wide acceptance by Australia and New Zealand
equal to 300gram/sqm zinc but due to recently there are lots of
temp fencing hire or rental companies bloom in Australia building
industry lots of temporary fencing panels was hire buy 42 microns
temporary obviously will lead to a cashflow issue so more and more
these companies revert to 14 microns temp fencing but again 42
microns temp fencing is good product cost-efficient products in all
market even it is a little bit expensive than 14 microns . In
theory, the 14 microns service life is 3 years so 42 microns 3
times ability of anti-corrosion so let us say half 5 years
42 microns temporary fence technical data sheet | |
Dimensions | 2100mm(H)*2400mm(W) |
Tubing | OD 32mm*2.00mm thick |
Mesh Spacing | 60mm*150mm |
Infill mesh size | 1736mm*2336mm |
V wire number | 36 *sticks wire *4.00mm |
H wire number | 17 *sticks wire *4.00mm |
Finished | 42 microns /300 gram/SQM |
Weight of panels | 20.5kg-22.0kg |
Service life | Salt spray testing result least 5 years |
40HC container | 560 unit if covered clamp and base |
Packing | Metal Pallet wrapped with plastic film |
Productions Time | All stocked |
Ocean time | 25 days to 35 days to any port of AU & NZ |
What papers you provided after shipping containers | |
Main: Packing list, Commercial invoice, bill of lading copy or
draft for telex release one, balance papers |