Top Fencing Co.Limited |
It is widely accepted as the industry leader to protect and deter
general attack from all types and conditions of intrusion. Palisade
fence is constructed using a post, rail and paling system. The
security level of the fence can be increased by increasing the
height of the fence, adding the pale numbers of each panel or
increasing the thickness of the pale. The pales are made from hot
formed and cold rolled steel belt,These belt offer both strength
and rigidity combined with a long life span.
Palisade normally produce three types of pales, "W" ,"D" profiles
and angle iron :
Pales- "W" section Most using type for palisade fencing as vertical
pales ,it is always the first choice for the pales .
Width | Thickness | Surface Treatment | Head | Height |
68mm - 70mm | 2.0mm 2.5mm 3.0mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | Single point Triple point | 1200mm |
1500mm | ||||
1800mm | ||||
2000mm | ||||
2100mm | ||||
2400mm | ||||
2700mm | ||||
3000mm |
Comparing with "W" profile pales , this type is more economical.
Width | Thickness | Surface Treatment | Head | Height |
68mm - 70mm | 2.0mm 2.5mm 3.0mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | Single point Triple point | 1200mm |
1500mm | ||||
1800mm | ||||
2000mm | ||||
2100mm | ||||
2400mm | ||||
2700mm | ||||
3000mm |
Its cost is similar with "D" profile ,and more simple than "D"
profile.
Width | Thickness | Surface Treatment | Head | Height |
40x40 | 2.0mm - 3.0mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | Single point | 1200mm |
1500mm | ||||
1800mm | ||||
2000mm | ||||
2100mm | ||||
2400mm | ||||
2700mm | ||||
3000mm |
As a connection pipe for the fence panels ,IPE type is the most
using way.
Size | Thickness | Surface Treatment | Head | Height |
100x55mm 100x68mm 120x74mm | 3.5mm 4.0mm 4.5mm 5.0mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | Cut sharp | On the fence height basis |
Variations for post
In addition to the standard posts many variations are available to
accommodate site requirements:
• wall fixing plates, cranked posts or base plated
• with cranked or straight extensions for barbed or razor wire
• cranked panels
Size | Thickness | Surface Treatment | Holes | Length |
50x50 40x40 | 5.0mm 6.0mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | With19 holes drilled on one edge side | 2710mm |
General Use:
• Electricity Providers and Regional Networks
• Water Industry
• Telecoms Industry
• Police and Law enforcement
• Railway Line/Track Protection
• Motorways and Highway Protection
• Channel tunnel and European Transport networks
• Schools, Colleges & Universities
• Research Laboratories