The razor mesh fence is a new type of safety fence welded by straight type razor wire.
It is usually welded into a square or diamond shape. This kind of
razor wire fence is impossible to climb and cut because it has
sharp barbs and strong wire. The typical feature of razor mesh
fence is that it’s a complete security fence requiring no
additional top options when installed.
High tensile core wires are welded in a diamond shape or square
shape with razor blades, acting as additional deterrent or means on
entrapment. This creates an effective barrier which is not just
impossible to climb, but resistant to cutting as well.
Straight line razor wire mesh is made of blade type barbed wire straightened for easy and quick
installation. It makes offer ideal fencing top lines for
frightening for the common metal wire fences.
Straightened line razor wire works well as top linings for fences
of various types. It is easy to be installed in many ways.
Straight line barbed tape wire is installed quickly. It can save
cost and at the same time achieve the effect of frightening and
stopping.
The blade types and sizes are the same with concertina coils while
it is supplied in the form of straightened line.
Features: Corrosion resistance, anti-aging, weather resistance, etc. The
forms of corrosion resistance include electric galvanizing and hot
dipped galvanizing.
Specification: The blade length, wire diameter, thickness can be custom made.
Common Sizes as below:
- Blade thickness: 0.5 mm; core diameter: 2.5 mm; blade length: 10
mm; blade width: 13 mm; blade distance: 26 mm.
- Blade thickness: 0.5 mm; core diameter: 2.5 mm; blade length: 20
mm; blade width: 15 mm; blade distance: 33 mm.
- Blade thickness: 0.5 mm; core diameter: 2.5 mm; blade length: 15
mm; blade width: 15 mm; blade distance: 33 mm.
- Blade thickness: 0.5 mm; core diameter: 2.5 mm; blade length: 22
mm; blade width: 16 mm; blade distance: 36 mm.
- Blade thickness: 0.6 mm; core diameter: 2.5 mm; blade length: 65
mm; blade width: 22 mm; blade distance: 102 mm.
welded razor wire mesh
Specification:
Core Wire: 2.50±0.05 mm high tensile galvanized wire or stainless steel wire
Razor Strip (sheet): 0.50±0.05 mm galvanized sheet strip razor or stainless steel sheet
trip
Square Razor Mesh Size: 50 × 150 mm,75 × 150 mm,100×150 mm
Diamond Razor Mesh Size: 75 × 150 mm,150 × 300 mm.
Panel Size: 1.2 m × 6 m, 1.8 m × 6 m, 2.1 m × 6 m, 2.4 m × 6 m.
Standard Blade Type: BTO-22, BTO-30.
Feature:
Extremely hard to cut with standard tools.
Galvanized steel, stainless steel, and PVC coated with custom
colors are available.
Nearly impossible to climb.
Away from the need for fence topping when installed.
Razorwire Specs – Stainless Steel 304
RAZORWIRE DIAMETER | 730MM | 500MM |
LENGTH EXT | 10M | 10M |
RAZOR WIRE DESIGN | CONCERTINA | CONCERTINA |
MATERIAL | STAINLESS STEEL 304 | STAINLESS STEEL 304 |
BLADE STYLE | BTO 22 | BTO 22 |
BLADE THICKNESS | 0.5MM | 0.5MM |
WIRE DIAM | 2.5MM | 2.5MM |
BARB LENGTH | 22MM | 22MM |
BARB WIDTH | 15MM | 15MM |
BARB SPACING | 34MM | 34MM |
LOOPS PER COIL | 54/55 | 54/55 |
CLIPS PER LOOP | 5 | 3 |
Razorwire Specs – Galvanised Steel 200g/m2
RAZORWIRE DIAMETER | 900MM | 730MM | 450MM |
LENGTH EXT | 10M | 10M | 10M |
RAZOR WIRE DESIGN | CONCERTINA | CONCERTINA | CONCERTINA |
MATERIAL | GALVANISED 200G/M2 | GALVANISED 200G/M2 | GALVANISED 200G/M2 |
BLADE STYLE | CBT65 | CBT65 | CBT65 |
BLADE THICKNESS | 0.6MM | 0.6MM | 0.6MM |
WIRE DIAM | 2.5MM | 2.5MM | 2.5MM |
BARB LENGTH | 65MM | 65MM | 65MM |
BARB WIDTH | 21MM | 21MM | 21MM |
BARB SPACING | 100MM | 100MM | 100MM |
LOOPS PER COIL | 54/55 | 54/55 | 54/55 |
CLIPS PER LOOP | 5 | 5 | 3 |
Choosing your Razor wire
The bigger the diameter the more of an obstacle and deterrent the
Razor wire is. 450mm diameter is the smallest size we recommend for
domestic type applications. This size is normally an adequate
deterrent and also the easiest to fit as standard support brackets
will generally do for this diameter and weight of razor wire. 730mm
or even 900mm diameter will require specially made brackets for the
installation.
If fitting to the ground then we would recommend a size that cant
be vaulted over, then the suggested options would be to install a
single run of 900mm diameter Razorwire or alternatively stack
smaller diameter Razorwire on top of each other either vertically
or in a pyramid fashion.
Points to note when selecting Razor Wire
The core wire diameter:
2.5mm is the industry standard, anything less has proportionately
less tensile and inherent strength.
The number of loops per coil
This determines the amount of Razorwire on the coil and therefore
the profile density when deployed, an important point when
comparing prices. All our coils have 55 loops per coil, this means
the coils can be extended easily up to 10m whilst maintaining a
dense profile of Razorwire.
Stainless Steel or Galvanised?
The environment the product is being deployed in may determine
whether Stainless Steel or Galvanised is the best option. Stainless
Steel is considerably more expensive but offers greater durability
especially in salt air environments and over time will outlast
Galvanised therefore making it the best long term option in salt
air. However Galvanised is more than adequate for most UK regions
and applications. We would always suggest you check the level of
zinc coating when selecting Razorwire, all our Galvanised products
are 200g/m2, if the supplier cant provide the information, you may
only be getting a product with 60g/m2 which will deteriorate and
rust much more quickly.
Blade type
Smaller blades such as BTO10 (10mm) are quite small and therefore
less of a deterrent, larger blade profiles such as CBT65 (65mm) are
much more effective but the blade type will also be reflected in
the price.
Blade thickness
0.5mm is the industry standard, anything less is likely to bend
easily.