|
[China]
Trade Verify
Address: No.48, Baihao Industrial Street, Houjie Town, Dongguan City, Guangdong Province, China
Contact name:Andy
DONGGUAN WIREMAC MACHINERY EQPT. CO., LTD. |
|
Verified Suppliers
|
|
|
500/6+12 Frame Type Stranding Machine For 7 And 19 Strands
Introduction
6 and 12 stranding machine are composed of stranding gearbox, main shaft, left and right stranding discs, frame, front support holder, pneumatic braking device and base. Four quartering frames are fixed on the left and right stranding discs, on which 6 and 12 sets of reel clamping devices are installed respectively. The tension of the reel adopts the mechanical tension belt. According to the size of the wire diameter, the pay off tension is ensured by manually adjusting the friction force, and the tension control is stable.
In addition, in order to prevent the continuous stranding due to wire breakage during work, resulting in less wires, an automatic stop device for wire breakage is installed on the stranding body. In case of disconnection during operation, the stop signal will be sent immediately and the equipment will stop automatically.
The clamping mode of the wire reel in the stranding cage adopts the structure of manual wrench driving the threaded sleeve to tighten the wire reel, which has self-locking ability to ensure safety.
Technical Parameters
| Item | Specification | ||||||
| Maximum load capacity | 4T | ||||||
| Maximum take-up speed | 65 m/min | ||||||
| Specification of take-up reel | PN1000 - PN1600 | ||||||
| Main drive motor power | 45KW | ||||||
| Ambient temperature | ≤ 40 ℃ | ||||||
| Air pressure | 0.6MPa | ||||||
| Gas volume | 0.5 m3/min | ||||||
| Power supply | three-phase five wire system, 380V (± 10%), 50Hz | ||||||
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie Town, a famous historic town in China. Our company is a wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing and research, with a variety of high quality machines: micro wire drawing machine, fine wire drawing machine, fine wire drawing machine with continuous annealing, medium fine wire drawing machine, intermediate wire drawing machine, intermediate RBD wire drawing machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions for customers, but also customize and design non-standard special equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based” enterprise, and continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the “High-quality and High-efficiency” business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for all customers.
(3) Please visit us and check our factory by video, and request necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can
also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control
complies with SGS & ISO 9001. Every machine has to past testing
and trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas
services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.
