|
[China]
Trade Verify
Address: Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Contact name:Selina Qiang
Ruixin Energy Equipmnet |
|
Verified Suppliers
|
|
|
A tubing end locator is a tool used for accurate measurement of the depth of tubing just as the name implies, which is located at the end of tubing to measure the depth of tubing correctly.
Ⅱ.General Technical Parameters
| Applicable Tubing | Fishing neck | Connection |
1.5＂ | 2-3/8",2-7/8＂ | 1.375＂ | SR15/16-10UN,QLS,BLQJ,HDQRJ |
1.75＂ | 2-7/8＂, 3-1/2＂ | 1.375＂ | SR15/16-10UN,QLS,BLQJ,HDQRJ |
2＂ | 2-7/8＂, 3-1/2＂ | 1.75＂ | SR1-1/16-10UN,QLS,BLQJ,HDQRJ |
2.5＂ | 3-1/2＂, 4-1/2＂ | 1.75＂ | SR1-1/16-10UN,QLS,BLQJ,HDQRJ |
3.5＂ | 5-1/2＂, 7＂ | 2.313＂ | SR1-9/16-10UN,QLS,BLQJ,HDQRJ |
III. Structural features
The tubing end locator is composed of a grooved body and a locating
key loaded by spring and fixed by pin in it. A shear pin limits the
outward movement and rotation of the locating key.
When the tool appears at the end of oil pipe, the locating key will
stop at the location approximately vertical to the body to prevent
the locator at the end of oil pipe from entering into the oil
again, and the shear pin can lift the tool.
Welcome to contact us at any time.
