Multifunctional Wire Retriever Slickline Fishing Tool
Wire Retreaver Wireline Fishing Tool
ⅠIntroduction
The Wire Retriever is be used to locate and retrieve Wireline
from the wellbore.
The Wire Retriever imay be used when there is a desire to locate
and potentially retrieve
a broken (parted) slickline or wire.
Different size fingered skirts may be interchanged depending on the
tubing size.
Ⅱ. Structure and operation
The Wire Retriever consists of eight main components:
1. Fishneck 2. Mandrel 3. Top Sub 4. Body 5. Washer 6. Dart 7.
Tapered Sleeve 8. Skirt (may
come in different O.D.’s)
Attach to the toolstring and lower into wellbore, Once the top of
the wire is found, work the
Wire Retriever up and down to allow the wire to become trapped
between the skirt and the
tapered cone, once this has been achieved remove toolstring and
broken wire from the
wellbore.