|
[China]
Trade Verify
Address: Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Contact name:Selina Qiang
Ruixin Energy Equipmnet |
|
Verified Suppliers
|
|
|
Wear Resistant Nickel Alloy X Wireline Running Tool
X Running Tools Wireline Running Tool
I.Introduction
An X running tool is a special tool used to run and set X/XN type lock mandrel. It can set the type X/XN lock mandrel into X/XN landing nipple selectively.
II.General Technical Parameters
| Nominal Size | Actual OD | Fishing Neck | Top Connection | Bottom Connection | |
| 1.5″ | 1.41″ | 1.188″ | 15/16″-10UN | 3/8-16UN | |
| 1.625″ | 1.593″ | 1.188″ | 15/16″-10UN | 3/8-16UN | |
| 1.875″ | 1.75″ | 1.375″ | 15/16″-10UN | 1/2-13UN | |
| 2.313″ | 2.175″ | 1.75″ | 15/16″-10UN | 5/8-11UN | |
| 2.75″ | 2.718″ | 2.313″ | 1-1/16″-10UN | 2/4-10UN | |
| 2.813″ | 2.72″ | 2.313″ | 1-1/16″-10UN | 3/4-10UN | |
| 2.875″ | 2.938″ | 2.313″ | 1-1/16″-10UN | 3/4-10UN | |
| 3.313″ | 3.406″ | 2.313″ | 1-1/16″-10UN | 1-3/8-12UN | |
| 3.813″ | 3.890″ | 2.313″ | 1-1/16″-10UN | 2-1/8-12UN | |
III.Structure Characteristics
The X running tool consists of fishing neck, inner sleeve, stop pin, main spring, spring housing, dog spring, split ring, locator dog, dog housing, crescent slide, retainer dog and mandrel. Enclosed is the assembly drawing.Before operation, the retainer dog catches the inner fishing neck of lock mandrel, and then connect the lock mandrel to the mandrel by shear pin. Make the crescent slide stuck into the groove of mandrel to
prevent movement. The locator dog will retreat to the groove of inner sleeve when the X running tool is entering the landing nipple. After passing through the landing nipple, the locator dog will expand automatically with the action of the dog spring.
Tools Can Be Manufactured To Any Size Required. Welcome to contact us at any time.
