|
[China]
Trade Verify
Address: 701, Yongchang Building, Xicheng Industrial Zone, Xixiang, Bao'an District, Shenzhen, China 518126
Contact name:Sunny
Shenzhen Qianhai Lensen Technology Co., Ltd |
|
Verified Suppliers
|
|
|
1W Wireless Radio Modem LS-U1000D , UHF Wireless Data Transmitter
Introduction:
LS-U1000D is a UHF band 1000mW data module. With elegant and easy-to-fix aluminum casing, DB9 port, it is convenient for you to connect with PC and some other meters or devices. Easy to install, no program needed, no communication fee.
Parameter:
| PERFORMANCE | |
| Power Output: | 1W (@5V power supply) |
| RF Line-of-sight Range: | 2000m@1200bps; 3000m@9600bps |
| RF Effective Rate: | 1200/2400/4800/9600/19200bps |
| Space Channel: | 1MHz(Default), (12.5/25KHz customization ) |
| Bandwidth: | <25KHz |
| Receiver Sensitivity: | -123dBm@1200bps(1% BER) |
| NETWORKING | |
| Networking Topology: | Point-to-point, point-to-multipoint |
| COMPATIBILITY | |
| KYL-200 and KYL-300 series | |
| POWER | |
| Supply Voltage: | 5V DC (default), 3.3-3.6V( optional) |
| Transmit Current: | <450mA |
| Receive Current: | <28mA |
| GENERAL | |
| Communication Mode: | Half-duplex |
| Frequency Band: | 433MHz default (400-470MHz selectable) |
| Channel: | 8(default),16/32/64(optional) |
| Interface: | TTL, RS232, RS485 |
| PHYSICAL PROPERTIES | |
| Size: | 80mm×45mm×20mm (excluding antenna base and data pin) |
| Weight: | 100g |
| Antenna Base: | 50Ω, SMA |
| Operating Temperature: | Industrial:-40℃~+85℃(TCXO) |
| Frequency Stability: | ±2.5ppm Industrial |
Application:
Pin Definition (9 pin)
| Pin No. | Signal Name | Function | Level | Connection with terminal | Remarks |
| 1 | GND | Grounding of power supply | Ground | ||
| 2 | VCC | Power supply DC | 5V | ||
| 3 | RxD/TTL | Data receiving | TTL | TxD | |
| 4 | TxD/TTL | Data transmitting | TTL | RxD | |
| 5 | SGND | Signal | |||
| 6 | A (TXD) | A of RS-485 (TxD of RS-232) | A(RxD) | ||
| 7 | B (RXD) | B of RS-485 (RxD of RS-232) | B(TxD) | ||
| 8 | SLEEP | Sleep control | TTL | Sleep signal | Low level valid |
| 9 | TEST | Factory testing |
