Active Member
|
[China]
Address: chigang, humen town, dongguan city, china
Contact name:Carson
YUYANG MACHINE Co., Ltd. |
|
|
90 Extruder Machine For 16mm 25mm Cable Extrusion Production Wire Making
Main features of machine
This equipment is applicable to outer surface extrusion of wires and cables for insulation materials such as PVC
Technical Characteristics
Extrusion Wire Gauge: Inlet Wire Diameter:
Finished Wire Diameter: Φ10 mm～Φ40mm, for 10 square mm, 16, 25,35,50,70,95,120 squre mm
Applicable Material: PVC,PE
Screw Diameter: Screw Diameter 90mm
Extrusion Capacity (When the head is turned on.): Φ90 Machine=max260 kg/h
Linear Velocity: 5～150m/min
Length of Production Line: 32 Meters
Installed Capacity: About 92KWh
Color: Grass Green
List of machine
| Item | Name | Model | Quantity |
| 1 | Side-axis Pay-off Frame | 1250-1500mm | 1 set |
| 2 | Straighter | 5 wheels | 1 set |
| 3 | Capstan stand | 2 wheels | |
| 4 | Powder stand | ||
| 5 | Extruder | 90mm | 1 set |
| 6 | Electrical Control Box | PLC | 1 set |
| 7 | Diameter testing equipment | 1 set | |
| 8 | Water Cooling Tank | 1 set | |
| 9 | Printer | For small size | |
| 10 | Drying Machine | 1 set | |
| 11 | Cover-type Tractor | 800KG | 1 set |
| 12 | Spark testing equipment | 35KV | 1 set |
| 13 | Side-axis Taking-up and Traversing Machine | 1200-2500 mm | 1 set |
| 14 | Spare parts | some |
Brand of parts
1.Motor is Siemens.
2.Temperature control: RKC
3.Relay:Omron
4.Touch screen: Siemens
5. Bearing:NSK
6. Inverter:Yaskawa
Accessory Parameters
1200～2500 Side-axis Pay-off Frame
1 .Type: Side-axis
2 .Maximum Load: 10000KG
3.Bobbin Lift: 1.5KW Motor + Drive Screw Lift
4. The distance between two columns can be moved by the bobbin’s width
, Motor + Drive Screw Lift.
5. Two take-up columns are cast iron pieces.
6.Payoff Device with Tension
90mm Extruder with cross head
Applicable Material: XLPE, Plasticization degree of 100%.
Maximum Extrusion Capacity:260kg/hr.
Mechanical Center Height: 1000mm
Ratio of Length and Diameter: 1:25
Compression Ratio: 1:2.8
Rotation Rate of Screw: 0—70 RPM
Material of Screw: One Ø90mm screw with
whole tooth nitrogen treatment of alloy
steel and chrome-plated polished surface and screw-passing cooling water device.
Material of Screw Cylinder: 38CrMoA1A alloy steel, nitrogen treatment and precisely
grinding. The surface hardness inside the screw cylinder is R2-3 degree higher than
that of the front surface of the screw and the screw thread. The cooling water jacket is
added on the feed point of the screw cylinder.
Gearbox: Imitation of Italian-type, hardened helical gear gearbox, material of cast
steel, oil-bath lubrication, tooth-face high-efficiency quenching and adoption of
Japanese NACHI bearing.
Electric Heating: 380V, with even three-phase separated flow.
Screw cylinder electric heating zone 5, the cast aluminum heating ring heating is
affixed with cooling air duct.
Head electric heating zone 1, heating by cast aluminum heating ring.
Neck electric zone 1, heating by the electro-thermal tablets.
Eye die electric heating zone 1, heating by the electro-thermal tablets.
Control of Temperature: Use the PID automatic temperature control gauge made
in Yangming, Taiwan, automatically set the control under 0-399℃ and use KTYP as
the thermal-couple.
Cooling: Screw cylinder zone 5, use 5 sets of cooling fans (370W).
Head: Vacuum equipment head
Host Motor: The motor drags with 37KW. The inverter controls and unloads by
synchronization. The velocity adjustment is convenient and steadily operated.
