Seal heat shrink solder connectors Wire Butt connector Red IP 67

China Manufactuer Seal Solder Heat Shrink Wire Butt connector Red

Product Details
100% brand new and high quality
An easy one step connection of wires, soldered, insulated and sealed
Can be ideal use in marine and automobile applications
Polyolefin tubing in outside and hot melt adhesive in inside
Solder and seal and with advanced waterproof function
Polyolefin heat shrink butt connectors improved pullout strength,
provides seal, strain relief, cable check, and insulation

1. Strip the wire 3/8". Select a connector that matches the wire gauge and insert the wire into the connector barrel.

2. Make sure the wire is properly seated and crimp the connector using an insulated connector crimping tool nest that matches the color or gauge of the connector. Do not crimp the solder sleeve.
3. Repeat steps 1 thru 2 for the other side. Apply heat evenly around the length of the tubing (including the crimp area) from the center out to the ends until the tubing fully recovers and the adhesive flows
4. Continue distributing the heat over the entire connector barrel until the solder flows into the center opening. Remove from the heat and let cool for the ULTIMATE connection.