Active Member
|
[China]
Address: No.53,Bochong Road,Humen Town,Dongguan City,Guangdong Province,China
Contact name:Jack Young
Dongguan HOOHA Electrical Machinery Company Limited |
|
|
400mm/500mm/630 mm Tubular Stranding Machine for bare copper Aluminum ACSR Conductor
1+6 tubular stranding machine usage:
It is for 7 strands copper wire , aluminum wire , ACSR conductor to round
Technical parameter
| Copper Wire diameter (mm) | 1.0-4.5 |
| Aluminum wire (mm) | 1.5-3.0 |
| Main engine speed (r/min) | 700 |
| type | 1+6 |
| Max OD | 15 mm |
| Strading pitch | 20-274 |
| pull wheel diameter | 1250 |
| bobbin | 400/500/630 |
| take up bobbin | 800-1250/800-1600 |
| line speed | 120 m/min |
| SIZE | 10-35 MM2 |
| Bobbin | PN 630×375×127 |
| Wire passing form | Inner tube |
| Max rotation speed of the tube | 600 rpm |
| Material of the tube | Special steel |
| Remove stress | After annealing treatment, the whole stranding body is more non-deforming and will enable a much longer service life. |
| Dynamic balance | Whole body dynamic balance, smoothly and low noise. |
| 3 bearings | Both ends and the middle stand by bearing, and the big bearing in the middle is forced lubrication, which reduces wear and prolongs life. |
| The cages in the tube | End shaft type, pneumatic wrench controls clamping or loosening bobbin. |
| Pay off tension | Friction belt controls the tension of wire and it is very simple. |
| Brake device of the tube body | Pneumatic brake. |
| The base of the machine | The base is welded by large I-beam and machined the top surface and the bottom surface by large planer. The whole tube body is installed on the base. The machine is easy to be installed. |
| Guide wheel of the wire | They are made by bearing steel, which is very wearable. |
What is your company export experience ? How do you service a new starter who are going to the wire and cable field ?
A : HOOHA focus and has been over 10 years exported on the front of the supply chain of the wire and cable making machine , wire and cable tester machine . A-Z service to support . business relationship with customers and partners are decade.
At HOOHA our mission is to be a team of highly skilled experts who collaborate to bring the best quality products, custom solutions, and innovative thinking to our customers.
1. Our pre-service team for machine designer ( 5 member) and wire and cable engineering (5) are over 15 years experience;
2. After service on electricity engineer (10), machinical engineer(8),software engineer(5) are over 10 years experience;
3. Sales team who is specialized in wire and cable engineering field ( 10 ) , are over 8-10 years experience in focus ;
4. Production self-inspection team ( 5 ) , are over 15 years experience .
