Home Companies Anhui Herrman Machinery Technology Co.,ltd

Fully Automatic Double Cable Twisting Machine With Bow High Speed Bunching

Anhui Herrman Machinery Technology Co.,ltd
Active Member

Contact Us

[China] country

Address: 16th Floor, Building C, Fortune Plaza, No.287, Suixi Road, Hefei, Anhui, China

Contact name:

Inquir Now

Anhui Herrman Machinery Technology Co.,ltd

Fully Automatic Double Cable Twisting Machine With Bow High Speed Bunching

Country/Region china
City & Province hefei anhui
Categories Cable Manufacturing Equipment
InquireNow

Product Details

Automatic Double Cable Twist Stranding machine With Bow High Speed Bunching

 

 

 

Twisting usage:

 

It is applied to the twisting of above 7 pcs of bare copper wires,tinned wires,silver jacketed wires and enamelled wires and double twisting for core wires.  mainly apply for stranding the electrical wire and automobile wire and other small section area Characteristics:


1. High rotation speed, max up to 2600rpm, is the 1.6 times than normal (1600rpm);


2. Use PLC, hysteresis clutch take-up device imported from German, tension sensor ensure the stable tension and high quality stranding wire, especially for high quality tight line.


3. Use carbon fiber bow, strong rigidity, uneasy-transformation, small shock, light weight, reduce air friction for high quality of conductors;


4. Use synchronous belt drive, just to replace the guide wheel to change the lay distance, easy to operate.


5. Use spindle to calculate meters, only 0.01% error for a certain wire&cable.


6. Use PLC automatically lubricate spindle bearing, avoid injecting too much or too little grease. Get rid of unnormal noise and worn, cost down for maintenance.

 

 

 

Main Technical Data

 

Equipment models500B650B650C800B
Twisting usageIt is applied to the twisting of aerospace, medical equipment, cellphone and ultra conductor(above seven pcs of bare copper wires, tinned wires, silver jacketed wires and enameled wires),double twisting for core wires.
Singlewire dia(mm)0.08-0.450.15-1.040.12-0.520.38-1.70
Stranding section area(mm²)0.05-2.50.35-6.00.30-4.01.0-16
Core wire single wire dia(mm)0.5-1.50.5-3.00.5-2.01.0-4.0
Core wire stranding outer dia(mm)1.0-3.51.0-6.01.0-4.02.0-8.0
Pitch(mm)6.3-52.3(24classes)11.6-100(34classes)11.6-100(34classes)23-147(20classes)
Direction of layOptional for right or left
Outer dia*bore*outer widthOD500 ID56 H375OD630 ID56 H475

OD630 ID56 H475

OD630 ID127 H475

OD800 ID80 H600

 

Max rotating speed3000rpm(6000twist)2000rpm(4000twist)2400rpm(4800twist)1500rpm(3000twist)
Main motor power5.5KW7.5KW11KW15KW
Inverter power5.5KW7.5KW11KW15KW
Tension control methodTouch screen +PLC+ magnetic powder clutch, it may ensure the constant tension from empty bobbin to full bobbin
Magnetic powder clutch1.2kgf5kgf2.5kgf10kgf
ProtectionMachine will automatically brake when wire inside and outside is broken, the machine will automatically stop when the preset length is arrived.

 

 

Machine Photo

 

 

Hot Products

Copper Rod Drawing Machine with Continuous Annealing and Double Spooler 1. Application This line is ...
Cable Drawing Machinery Trolley Wire Drawing Machine for High Speed Train Trolley Wire 1. Introducti...
Large Cross Section Copper Alloy Shaped Wire Drawing Machine 1. Introduction The machine is use for ...
Multi Wire Wire Drawing Machine With Annealing Device And Single Take-up 1. Main Technical data: ...
Trolley Wire Drawing Machine Bull Block Drawing Machine copper alloy wire drawing machine Descriptio...
High Speed Rod Breakdown Wire Drawing Machine For Copper And Aluminum Application Copper and ...