Home Companies Anping Yuda Wire Mesh Co., Ltd.

Razor Barbed Wire Prisons Security Fencing Cheap Razor Fence

Contact Us

[China]

Trade Verify

Address: Xiwangzhuang Developing Zone, Anping, Hebei, China

Contact name:YUDA

Anping Yuda Wire Mesh Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Razor Barbed Wire Prisons Security Fencing Cheap Razor Fence

Country/Region	china
City & Province	hebei
Categories	Resin Crafts

Product Details

Razor Barbed Wire Prisons Security Fencing Cheap Razor Fence

Razor Barbed Wire is a new kind of protection fence with such advantages as beautiful appearance, economical cost, practicality and convenient construction. It plays the role of protection in mine, garden apartment, frontier post and prison, etc

The blade piercing rope is formed by mechanically pressing and rolling steel plates onto steel wires, with a blade piercing width of 22mm. The barbed wire rolling cage adopts a blade barbed wire loop, and two adjacent loops are fixed with barbed wire connection clips every 120 degrees. After opening, it forms a snake belly network. After closing, the diameter of the blade barbed wire loop is 50cm. After opening, the installation spacing for each cross loop is 20cm, and the diameter is not less than 45cm.

Razor wire in concertina form, the coils diameter ranges from 300mm to 1000mm. Lower diameters usually consist of three clips per loop and higher diameters consist of five clips per loop.

Razor barbed wire is a kind of modern security fencing materials fabricated with razor-sharp steel blade and high-tensile wire.

It can be installed to achieve the result of frightening and stopping to the aggressive perimeter intruders, with piecing and cutting razor blades mounted at the top of the wall, also the special designs making climbing and touching extremely difficult.

FAQ

Q:Are you manufacturer?

A:Yes.We have been in manufacturing this product for 25 years

Q:Where is your factory?

A:Anping County, Hebei Province, China.

Q:What’s factors in quotation?

A:Wire diameter,mesh aperture,length,width,height,quantity

Q:How many days the samples will be finished?And how about the mass production?

A:Normally,2-5 days for samples,18-20 days for 3-5 containers.

Q:Do you have technique support on installation?

A:Yes ,we have professional engineer for installation guide service.

Outside Diameter	No.of Loops	Standard Length per Coil	Type	Notes
450 mm	33	8m	CBT-65	Single coil
500 mm	41	10m	CBT-65	Single coil
700 mm	41	10m	CBT-65	Single coil
960 mm	53	13m	CBT-65	Single coil
500 mm	102	16m	BTO-10.15.22	Cross type
600 mm	86	14m	BTO-10.15.22	Cross type
700 mm	72	12m	BTO-10.15.22	Cross type
800 mm	64	10m	BTO-10.15.22	Cross type
960 mm	52	9m	BTO-10.15.22	Cross type