Active Member
|
[China]
Contact name:Song
Dingzhou Jinte wire mesh equipment Co., Ltd |
|
|
PLC Control Automatic Steel Concrete Reinforcing Wire Mesh Welded Machine
Welded Wire Mesh Machine Introduction
| Machine name | full automatic welding wire mesh machine for roll |
| Model | JT-W |
| Power | 75KVA |
| Dimension | 1.8mx2.5mx1.7m |
| Max welding width | 2.0m |
| Min welding mesh size | 25.4mm |
| Welding wire diameter | 0.6-1.5mm |
| Welding speed | 120-140times/min |
| The machine structure | Vacuum casting and steel welding |
| Weight | 3.2T |
| The equipment include | JT-W Control electric cabinet Pay-off stand Wire butt machine Repair mesh machine |
Welded Wire Mesh Machine Technical Parameter
| Welding wire diameter | 0.6-0.8 mm |
| Mesh size | 1/4"-4" |
| Mesh width | 600-2100 mm |
| Welding speed | 80-120 times/min |
| Voltage | 380v-415v,3 phase electric 50HZ |
| power | 85KVA*6 |
| Dimension | 2500*1500*1200 mm |
| Weight | 2600 kg |
Welded Wire Mesh Machine Advantages
1. This machine is adopt PLC control system,full automatic to feed wires, weld mesh, cut edge and roll mesh.
2. The raw material is applicable for low-carbon steel wire,
galvanizing wire and stainless steel.
3. It has advantages of reasonable design, low noise, stable
working, easier operation etc.
4. The mesh size is precise and can be set according to customers'
requirements.
5. It adopts sealed &water cooling welding transformers, the
scoria can not easily goes in.
Welded Wire Mesh Machine Finished Products
It mainly used for the construction mesh, breeding mesh (rabbit cage, fox cage, mink cage etc.)
