Active Member
|
[China]
Contact name:Song
Dingzhou Jinte wire mesh equipment Co., Ltd |
|
|
Direct wire drawing machine is a common metal wire processing equipment, direct wire drawing machine, high, medium, low carbon steel wire, stainless steel wire, copper wire, alloy copper wire, aluminum alloy wire, etc., wire processing.
Advantages: The error is 0.1%;Automatically decelerate and stop at fixed length;Broken line detection and automatic stop;Any reel positive and negative inching and left and right linkage;Display all kinds of fault information and processing information;Monitoring of various sports information.And support any die matching process, die wear through tuning automatic compensation, not easy to break wire.
| Model | specification of supporting equipment |
| Equipment model | Model jt-9/560 straight-through wire drawing machine |
| Drum diameter (traction diameter) | 560mm |
| Draw number | 580—490—430—375—325—280—250—225—200 |
| Into Φ wire diameter | Φ6.5mm--Φ6.0mm |
| Wire diameter | Φ2.5mm--Φ2.0mm |
| Incoming line strength | ≤450mpa |
| Maximum compression rate | 90.5% |
| Maximum linear speed | 14m/s |
| Motor power | 30KW*9＋receiving line15 KW＝213KW |
| Mold size | Φ40mm*30(polycrystalline) |
| Drum arrangement | The head of the machine is upright and inclined |
| The direction of the machine | from left to right |
| Discharge mode | vertical discharge |
| Collection line way | Zws-760 i-wheel wire retractor (pneumatic clamping, push wheel) |
| Wear-resistant | The rotating parts in contact with the steel wire shall be sprayed with tungsten carbide on the surface with a hardness of 70 degrees |
| Drum (tower wheel) cooling | Narrow slot spray cooling
|
| Die box cooling form | Draw water
|
| Coolant |
User liquid supply, external circulation
|
| Lift frame | Built-in tension |
| Frame | Welding machine of steel plate and square pipe |
| Driving | belt |
| Bearing support form | Case closed |
| Grease for bearing |
Tank self lubrication
|
| Parking brake | Pneumatic brake (car drum) |
| Electrical cabinet | Vito structure, protection level IP54 |
| Electrical system | frequency conversion speed regulation DP communication given |
| Gas, water, electric | The buyer shall connect to the equipment interface |
I-wheel motor
|
15 kw motor
|
| Wire-drawing motor | 22 kw motor |
FAQ
Q: Are you the factory?
A: Yes,We are a professional wire mesh machines manufacturer. We dedicated in this industry for 22 years. We can offer you competitive machines.
Q:Where is your factory located? How can I visit there?
A:Our factory is located in ding zhou county, hebei Province, China, about 3.5 hours by car from Beijing .All our clients, from home or abroad, are warmly welcome to visit our company.
Q: What is the voltage ?
A: To ensure each machine runs well in different country and region, we will choose different voltage like 220V 50HZ; 380V 50HZ; 415V 50HZ;440V 60HZ etc
Q: How much is your machine ?
A: The price is depended on 3 factors:wire diameter, mesh size,and mesh width.
Q: What is your payment terms?
A:Usually by T/T ( 30% in advance, 70% T/T before shipment) or 100% irrevocable L/C at sight, or cash etc. It is negotiationable.
Q: Do your supply includes installation and debugging ?
A: Yes. We will send our best engineer to your factory for installation and debugging. The cost will be quoted separately if you need such service.
Q: How long is your delivery time?
A: If we have in stock, delivery to Tianjin port about 5 days, No stock, it will be 30 days after received your deposit.
Q: How can you guarantee the quality and the warranty?
A: We have an inspection team to check the products at all stages of the manufacturing process-raw material, welding process and test the finished products, etc. 100% inspection in assembly line to achieve the required quality levels.
