Main configuration:
A. One set of die holder,
B. 6 sets of welding gun movable precision slide rail modules,
C. 3 sets of servo motors,
D. 5 split CO2 welding machines,
E. PLC and human-machine interface plus a set of programming
control. F. 6 sets of stepping motors.
Work flow:
1. The master puts the workpiece onto the fixed die manually
2. Start the work button
3. The pressing cylinder works and presses the workpiece.
4. Four spot welding guns shall be used first.
5. The fifth welding gun is the workpiece of the pull welding gun.
6. After welding, the pressing cylinder shall be reset.
7. Take the workpiece manually and put it into the next workpiece
8. Repeat the cycle for the next workpiece.
In the whole process, the master needs to place and take the
workpiece. Others are automatically welded by the machine.
Factory strength
Independent R & D and production, focusing on welding and
forming equipment for more than 20 years. It is exported to the
world, and there are sales companies in Vietnam. It has accumulated
tens of thousands of customers.
