Pulsed Laser Coherent Doppler Wind Lidar Horizontal Vertical Wind Speed Lidar

Pulsed laser coherent Doppler principle

1,Product introduction

Placement: The radar needs to be placed on a flat ground, and a wooden board or four-footed bricks can be covered under the radar to ensure that the radar is roughly level.

Adjustment of pointing to the north: the arrow on the radar is pointing to the north, and the electronic compass or physical compass such as a mobile phone is used as a reference to adjust the orientation of the device. Radar true north can also be adjusted using GNSS tooling.

Level adjustment: Adjust the four adjustment wheels below the radar (adjust clockwise to extend the feet), so that the horizontal bubble above the radar is within the black circle (the adjustable length of the feet is 40mm). After the adjustment is completed, the radar must ensure that Stable without shaking. There is an electronic compass inside the radar for automatic calibration, but radar leveling is more helpful for accurate measurement data.

2,Product parameters

3,Application scenarios

① Early detection of wind resources

② Offshore construction and operation and maintenance wind power monitoring

③ Prediction of wind power in offshore wind farms