Title:Double-folded Wire Rope Drum & Cable reel with Rope Line
Device
1.Brief introduction:
- The double-folded groove is named LBS groove.It consists a section
linear groove and a section diagonal groove in each circle of
the drum. And the two groove have the same position on each trun.
When the wire rope is multi-layered the position of the
intersection of the upper wire rope and the lower wire rope is
fixed by the diagonal rope groove, so that the upper wire rope is
completed in the oblique line segment.In the linear groove section,
the upper wire rope completely falls into the groove formed by the
two lower wire ropes, which makes it stable between the upper and
lower wire rope.
- When returning the rope, the stepped ring with the return flange at
both ends of the reel is used to guide the wire rope to climb and
return smoothly, so as to avoid the ropes caused by the mutual
cutting and pressing, so that the wire ropes are arranged neatly
and smoothly transition to The upper layer achieves multi-layer
winding.
2.Product grooving:
- Processing by your drawing or customization
- The grooving includes integral LBS drum and split LBS
grooving. Pls provide drawing if possible.
- Customization LBS drum need the parameter as follows:
- drum diameter
- width between the flanges
- rope structure
- material
- rotation direction of grooving
3.LBS rope groove material:
- Polymer nylon, carbon steel, alloy steel, stainless steel,
aluminum and various high-strength steels Q345, Q420, Q460, 20GrMo,
40GrMo, 42GrMo, etc.
4. LBS grooving advantages:
- The LBS tech solve the mess and bite problem when thewire
rope winding.
- The folding rope groove makes the winding of the steel wire
smooth and the load between the layers evenly distributed.
- This technology greatly prolongs the service life of the
steel wire rope, can extend the life of the steel wire rope by more
than 500%, reduce the damage of the steel wire rope, and improve
the safety of the operation of the equipment, and Reduce the
downtime of mechanical equipment due to rope change.
5.Application conditions:
- the split-type LBS groove generally can be mounted on a
smooth, grooveless drum-for for retrofit or where the drum
needs to be replaced.
- The split -type sleeve system consists of a pair of outer casings
that are bolted or assembled on a smooth light cylinder, so that
the outer surface of the cylinder becomes a grooved form, and the
split sleeve is composed of a spiral groove and a parallel groove,
and the groove is formed. The design conforms to the specific rope
structure, diameter and length.
![](http://img.everychina.com/nimg/6c/bd/6bf3b3795dbc174bdf5d0a8d367e.jpg)
![](http://img.everychina.com/nimg/87/68/ff975f6e2013eaf16c32f40a712b.jpg)