|
[China]
Trade Verify
Address: 107 National Road, Sijiazhuang Town, Luquan District, Shijiazhuang, Hebei province,china
Contact name:Marie
Hebei Junke Machinery Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
A way to save money is to use a light reel and an outer bushing with a groove for the line, cut the bushing horizontally in two parts and bolt or weld it to or weld it to the light reel. If a different type or specification of wire rope is used in the future, the bushing can be removed and replaced with a bushing designed for the new wire rope.
The double fold cable groove system ensures that the multi-layer winding wire rope on the reel is completely smooth into and out of the reel, and can greatly prolong the life of the wire rope. This system is still the most effective and perfect method. Tests have shown that the Lebus reel can extend the wire rope with a rope groove matching the specifications of the wire rope
Our factory has more than 2000 sets of advanced equipment such as
casting, forging, gear processing, sheet metal stamping, riveting,
heat treatment and mechanical processing. In recent years,
the Germany CW1000 machining center, CNC four axis, five axis
linkage machining center, CNC punch, large CNC hobbing gear
grinding machine, large CNC floor boring and milling
machine, Vacuum electron beam welding, CNC welding robot and
80 roll machine
1. Offshore Marine machinery: Offshore petroleum crane winch,
Mooring winch, Traction winch, Man-riding winch, Anchor winch,
Hydrologic winch
2. Engineering machinery: Cable winch, Tower crane, Piling machine,
Hydraulic winch
3. Oil field industry: Oil drilling rig, Petroleum tractor hoist,
Petroleum workover rig, Trailermounted pumping unit winch , Logging
winch, etc
4. The building machinery: Building wipe wall winch, Winding hoist,
Windlass
5. Mining winch: Dispatching winch, Prop-pulling winch,Sinking
winch, etc
6. Crane machinery: The bridge lifting machine, Tower crane, Gantry
crane,Crawler crane winch
No: | Wire diameter(mm) | Pulling Force(KN) | Rotation Direction | Drum Diameter(mm) | Drum Length(mm) |
1 | 3~8 | 3~10 | Lefthand,Righthand | >160 | <1000 |
2 | 10~16 | 12~20 | Lefthand,Righthand | >320 | <1000 |
3 | 18~24 | 20~80 | Lefthand,Righthand | >480 | <1000 |
4 | 26~32 | 100~120 | Lefthand,Righthand | >640 | <1000 |
5 | 34~40 | 150~200 | Lefthand,Righthand | >800 | <1000 |
6 | 42~50 | 240~400 | Lefthand,Righthand | >1000 | <100 |
1.The flanges of drum shall be perpendicular to drum wall at any
conditions,even under the load.
2.The rope must be kept under tension in the process of spooling so
that the rope will be crushed against groove wall. When spooling
can not meet this condition,a press roller shall be used.It is
generally recommended that the tension of the rope should be at
least 2% breaking tension or 10% working load.
3.The fleet angle range should generally never be more than 1.5
degrees and not less than 0.25 degrees.
4.When the wire rope released from the drum goes around the
sheave,the center of sheave should be over the center of drum.
5.The rope must be kept round,not loose,even under the maximum
load.
6.The rope must be anti-rotation structure.
7.Pls measure the change of rope diameter under different load.
