|
[China]
Trade Verify
Address: No.16, Jinzhan Street, High-tech Zone, Zhengzhou city
Contact name:Admine
Zhengzhou Hengliang Tech Co., Ltd. |
|
Verified Suppliers
|
|
|
Platform Low Speed Weigh In Motion 0.5-40km/H Truck Axle Scales
When the vehicle enters the weighing lane, the vehicle separator detects the arrival of the vehicle and generates a signal to inform the weighing controller to enter the weighing working state; When each axle of the vehicle is weighed by the quartz sensor in turn, the quartz sensor measures the load of each axle in real time and sends it to the weighing controller for recording; When the vehicle passes completely, the vehicle separator also generates a signal to inform the weighing controller to enter the data processing state; In the data processing state, the weighing controller accumulates the recorded axle load to calculate the total load of the vehicle, calculates whether the vehicle exceeds the limit and the specific number of exceeding the limit according to the detected vehicle type classification, and outputs the vehicle type classification, total load of the vehicle, vehicle limit value and other data.
Device Configuration (Low Speed WIM System) | Quartz Sensor |
| Weight Meter(Low Speed) | |
| Weight Module(Low Speed) | |
| Charge Amplifier | |
| Wheel Identifier Sensor | |
| IR Vehicle Separator | |
| Electrical Cabinet(Optional) |
Product Parameters
| Weighing error | 5%~10% |
| Single axle load | 40Ton |
| Max Single Load | 60Ton |
| Speed rate | 0.5~40km/h； |
| Speed error | ≤±1km/h |
| Wheelbase error | ≤±100mm |
| Power | AC 220V 50Hz |
| Output information | Speed, total weight, axle load, axle number, wheelbase, vehicle type and passing time |
| data interface | RJ485 |
| work environment | -45℃～80℃,0～95% |
| Confidence | ≥95% |
