Active Member
|
[China]
Address: No. 8206, Baoan Avenue, Shajing Street, Bao'an District, Shenzhen, China,
Contact name:Elaine
Shenzhen D-Fit Technology Co., Ltd. |
|
|
Wireless Audio Baby Monitor Electronic Babysitter Intercom Radio Nanny Baby Phone with audio/battery indicator and music
Ⅰ. Introduction of the baby monitor
Do you have these troubles with your baby?
There is no freedom, you need to take care of your children.
Worried that your baby and don't get enough sleep. Wake up and cry,
no one knows when the baby wakes up. Frequent opening of the door,
affecting the baby's rest. Our baby monitor can help you solve
these problems and become a good helper for the mothers.
Ⅱ. Applications:
Baby/Senior/children/pet monitoring
Ⅲ. Quick Details
1. Place of Origin: Guangdong, China
2. Power Supply Voltage: 3 AAA rechargeable batteries , 6V
3. Operation Frequency: 2.401~2.482GHz
4. Mic Sensitivity: 1 to 2 meter
5. Certificate: CE,FCC,ROHS
6. Communication: 2 way
7. Talking Range: 300m
Ⅳ. Features:
1)2.4Ghz digital platform
2) Two way communication
3)Communication range:300m
4) Temperature
5) Music
6) Night light
7) Voice activated
8)Audio indicator
9)Battery indicator
10)Out of range alert
11)Adjustable volume
Ⅴ. Technical Specification.
| Voltage | 4.5V DC |
| Battery | 1.5V AAA Alkaline or1.2V NI-MH Battery |
| Adaptor | 5V DC |
| Frequency | 2.400GHz～2.483GHz |
| Digital platform | FHSS |
| Transmit power | 18 ±3dBm |
| Communication range | ≥300m in open area |
| Battery working hour | ≥3 hours |
| Battery standby hour | ≥ 40 hours |
| Working temperature | 0℃-40℃±1℃ |
Ⅵ. Trouble Shooting
| Problems | Solutions |
| 1. No power | - Unit switches off. - Check if the batteries are installed properly. - Make sure the adaptor is connected to the unit properly if using the adaptor instead of batteries. - The unit may be in low battery status, change new batteries. |
2. Message not transmitted.
| - Units are out of range or lost connection. Ensure the distance between the units within communication range. Note: Communication range varies depending on surrounding conditions such as physical obstructions, interference. - Make sure the TALK button of Parent Unit is not pressed. - Ensure both units have paired. |
| 3. Units lost pairing | - Press and hold the button - While units fail to pair, either Baby Unit is power OFF or lost
signal, Parent Unit will sound “DI, DI, DI …..”, |
| 4. No sound signal | - Volume level on Parent Unit is set too low. Adjust it to higher level. - Units are out of range. Ensure the distance between the units within communication range. - Make sure the TALK button of Parent Unit is not pressed. - Ensure both units have paired. |
5. Received Conversation or sound from neighbors. | - Signal interference due to other nursery monitor on the same ID Code or cordless phone used. |
| 6.Hearing static or rustle from Parent unit. | - The both units are positioned too close to each other. Keep away two units at about 1m. - The volume is set too high. Turn the volume down of Parent Unit. - Reposition or replace batteries. |
| 7.Power LED rapidly flashes green light and can not receive or transmit | - The power is too low. Change new batteries or operated by the supplied adaptor. |
and ► on Parent Unit until the first BLUE LED indicator on top
flashes only, then press and hold the button 
and “+” at the same time on Baby Unit, units are paired when “DI…”
sound was heard on both units.
and the signal keeps flashing.
