|
[China]
Trade Verify
Contact name:Daisy He
Shanghai Genius Industrial Co., Ltd |
|
Verified Suppliers
|
|
|
Robot Joint Arm Gearboxes RV Cycloidal Drive Pinwheel Planetary Cyclo Gear Reducer
Its transmission process as follows : input shaft equipped with a 180-degree dislocation of the double eccentric sets, replaced with two eccentric turn as a roller bearing arm, the formation of H-, two cycloid round hole at the center shall uplink Eccentric Roller Bearings arm, which cycloidal gear needle round and meshing phase, comprising a difference of the teeth meshing with the gearbox.
Structure Principle:
1-All transmission device of epicyclic cycloidal pinwheel speed reducer can be divided into three parts: input part, slowing down part and output part.
2-The input shaft is installed a dislocation 180° double eccentric locking collar that is installed two roller bearings. It forms H mechanism. The central hole of two cycloidal wheels is just the roller table of tumbler bearing at eccentric locking collar. Meanwhile it is meshed with one group of pin wheel arranged in ring shape at cycloidal wheel and pin wheel in order to consist of less differential gear inner meshing speed-down mechanism (in order to reduce friction, the pin tooth has sleeve of pin tooth at speed reducer with small speed ratio).
3-When input shaft brings eccentric locking collar to rotate one cycle, because of the characteristic of tooth profile curve at cycloidal wheel as well as it is limited by up pin tooth of pin wheel, the motion of cycloidal wheel becomes a plane motion with revolution and rotation. When the input shaft rotates clockwise one cycle, the eccentric locking collar rotates one cycle too. The cycloidal wheel will rotates one differential gear at opposite direction and the speed-down can be got. By means of W output mechanism, the low velocity rotation motion of cycloidal wheel will transmit to output shaft through axis pin and lower output velocity can be got.
Cycloidal Gear Reducer Features
1. High speed ratio and efficiency
Single stage transmission can reach to 1:87 of speed-down ratio and the efficiency is more than 90%. If use multi-speed drive the speed-down ratio is bigger.
2. Compact structure and small size
Being adapted epicyclic transmission principle,the input & output shaft are at same axis center,it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited at the minimum content.
4. Reliable in operation and long life
Because the main parts are made of bearing steel through quenching treatment(HRC58-62), it got high strength. Meanwhile the transmission contact of part adapts rolling friction, so it is durable and long life.
5. Strong overload capacity, resistant to impact, small moment of inertia.
It is used for the occasion of frequently starting and positive and negative rotary.
Because of reasonable in design, convenient in maintenance, easy to disassemble and assemble, the minimum amount of part and simple lubrication, the reducers are trusted by our customers deeply.
RV-20E Working Parameters
Output rotate speed
r/min
Model | 5 | 15 | 25 | 35 | ||||
Output Torque | Input Power | Output Torque | Input Power | Output Torque | Input Power | Output Torque | Input Power | |
Nm | kW | Nm | kW | Nm | kW | Nm | kW | |
20E | 243 | 0.17 | 180 | 0.38 | 152 | 0.54 | 137 | 0.66 |
Note: The rated torque is the output torque when the output rotate speed is at 15r/min.
RV-20E Performance Parameters
Model | Speed Ratio | Allowable output speed | Maximum Backlash | Allowable acceleration/deceleration torque | Momentary max allowable torque | Allowable moment | Momentary max allowable movement | Weight | Efficiency | Noise | |
Shaft Rotate(R) | Housing Rotate | r/min | arc.min | Nm | Nm | Nm | Nm | kg | % | dB | |
20E | 81 | 80 | 75 | 1 | 450 | 900 | 880 | 1760 | 4.7 | >80 | <75 |
105 | 104 | ||||||||||
121 | 120 | ||||||||||
141 | 140 | ||||||||||
161 | 160 | ||||||||||
RV-20E Installation Parameters
Inner hexagon bolt
Nominal dimension x pitch(mm) | Fastening Torque(Nm) | Fastening Force(N) | Bolt Requirement |
M6 ×1.0 | 15.6±0.78 | 13180 | GB/T 70.1-2000
Intensity class:12.9 Thread requirement: GB/T 1167-1996 |
M10×1.5 | 73.5±3.43 | 38080 |
Genius Robotics Zhenkang High Precision Planetary Gearboxes are widely used in the aviation industry, spaceflight, ship, radar, submarine, food machinery, medical machinery, women’ supplies machinery, composite materials. Equipment, precision testing instruments, data communication system, robot, mechanical arm, CNC machine tool, cutting and welding equipment, laser system, textile machinery, printing and dyeing machinery, packaging machinery, printing machinery, testing machines, stamping technology, plastic machinery, glass machinery, lifting machinery, metallurgical machinery, engineering machinery and University Scientific Research Institute and so on.
FAQ
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the
product and the level of customization. For standard products,the
payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OBM company, we can provide and adapt our products to a
wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications;
For instance, costly products or standard products will usually
have a lower MOQ. Please contact us with all relevant details to get the most
accurate quotation.
