Anping Baochuan Wire Mesh Products Co., Ltd. |
|
4320mm*311*83 Highway Guardrail Hardware / Highway Guardrail Cost Per Foot
Galvanized material | Zinc |
Galvanized thickness | Average 85um, any point is not less than 61um |
Exterior | Are complete, consistent color,smooth surface and pactical,no-sag, drip tumors, lumps and other defects |
Impact test | Zinc layer does not peel off, no bumps, no cracking |
Bending | No cracks, peeling and other phenomena |
Zinc coating uniformity | 5 copper sulfate erosion, constant red |
Salt spray | No corrosion phenomenon |
Use of highway guardrails
Highway guardrails are considered as passive protectors with a view to ensure the safety of the pedestrians by the wayside and the vehicles. Highway guardrails are designed in pursuance to the principle of keeping the vehicle inside the road in a secure way and at the same time minimizing the loss of life and property in case of an accident.
Highway rail are mainly used for separating and defining aisle ways, large work areas, walkways and inside loading docks. Guard rail provides a visual and physical barrier between traffic and work areas. It is of protection against accidents due to lift trucks or other mobile equipment in dock areas, aisles, around special equipment, or offices. Using of galvanized rails reduces costly damage to equipment and inventory. If any need, it is easy to expand or move modular system. It is suitable for indoor or outdoor use as well.
Highway rail is also for highway safety. Metal guard rail is fixed on the side of the roads or middle of the road, especially on curves and slopes for preventing vehicles from riding out from roads. The w beam barrier are of excellent anti-corrosion and tensile strength. So that, it is good to minimize the damage to driver and pedestrian.
It’s often need to remove guardrail temporarily for unobstructed maintenance or other access to an area. Layout flexibility and the ability to relocate barriers at minimal cost is an important factor.