|
[China]
Trade Verify
Address: No. 8, Wenqu Road, High-tech Zone, Hefei, Anhui
Contact name:Larry
Anhui Wanyi Science and Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Smart Leak Detector Differential Pressure Type Air Tightness Leak Detector Tester
Product Description
The instrument detects the pressure drop per unit time through a
high-precision pressure sensor. The system has a simple structure,
high reliability and low maintenance cost. It is convenient for
large-volume long-time pressure monitoring and leakage detection
Product Performance
By filling compressed air of specified pressure into the measured
object (product), this instrument detects whether there is leakage
according to the change of its internal pressure. Firstly, the leak
detector fills the measured object with the regulated gas, and then
stops the inflation to maintain pressure. During the pressure
maintaining process, it senses the pressure drop caused by leakage,
that is, direct pressure leakage rate, through a high sensitivity
pressure sensor.
Industry Application
Automobile, new energy, electronics, medical, food
Product Parameter
| Direct pressure air tightness leak detector | ||||
| Main models and technical parameters | ||||
| Direct pressure sensor | Recommended Test pressure Range | ZH500 | Mechanical pressure regulating | 10KPa~500KPa |
| ZH1000 | Mechanical pressure regulating | 50KPa~1200KPa | ||
| ZH2400 | Mechanical pressure regulating | 50KPa~2400KPa(optional) | ||
| ZH600-X (multi-station) | Mechanical pressure regulating | 10KPa~500KPa(optional) | ||
| Sensor error | ±0.1%F.S. | |||
| Display Unit | Test pressure | KPa,MPa,kg/cm2,psi,mbar, bar, Torr, mmH2O, mmHg | ||
| Leakage | Pa,kPa,Pa/s,kPa/s,kPa/min,mL/s, mL/min,mL/h,L/min,L/h,SCCM | |||
| Parameter program number | Other | 64 groups (1~64) | ||
| ZH600-X(multi-station) | 64 groups (A/B/C/D each channel can set 16 groups of parameters program) | |||
| Test Beat Setting | 0 ~ 999 seconds, test time 1800 seconds | |||
| Power Supply | AC 220V±10%,50Hz | |||
| Test Pressure Source | Clean, dry, adequate flow, not less than 500KPa and 100KPa above the test pressure source | |||
| Overall dimensions | 460mm×328mm×222mm | |||
| Weight | 14kg | |||
