Anping County Hengyuan Hardware Netting Industry Product Co.,Ltd. |
Verified Suppliers
|
|
Material: SS304, SS304L, SS316, SS316L, SS321, Duplex, Hastelloy, etc
External diameter: 25--300mm
Standard: Non-standard, OEM, ODM
Easy leakage, wear resistance, corrosion resistance. The mesh cross
section is a trapezoid, narrow width of the gap, have a wire made of cold rolled
stainless steel, this wire is support rods. The screen is uniform, the welding is
stable, high hole rate, long service life, high strength, stiffness and bearing capacity
of rigid, screening filter device can be made into various shapes.
Item | Wedge Wire Screen Pipe |
Material | Stainless steel 304, 304L, 316L and 321 etc. |
Profile Wire Width | 1.0mm to 3.2mm |
Profile Wire Height | 2.0mm to 6.0mm |
Support Rods Width | 2.0 3.0mm |
Support Rods Height | 3.0mm to 7.0mm |
Round | From 2.5mm to 6.0mm |
Slot Size | 0.1mm, 0.15mm, 0.25mm, 0.3mm ... 100mm etc |
Pipe Length | Max 6 meters |
Pipe diameter | 29mm to 1200mm |
Pipe Screen Ends | Plain Beveled ends, male/female threaded, flange or close up. |
Usage | Sewage treatment and flood system: water source inlet, basement supply, carbon and resin retention, decentralization softening and ion exchange, sand, double and mixed media filtration, waste water sludge treatment; |
Mineral processing, paper making and food processing: screening, coal drying, starch filtration, pulp and plant fiber filtration, beverage filtration; | |
Customized | Available |
• Reduce energy consumption and increase water flow.
• Reduce erosion of entry surfaces and increase well life.
• Allow a uniform and efficient well development.
• Reduce significantly potential pump damage and subsequent
maintenance costs.
We can produce products according to the needs of our customers.
Material: stainless steel 304, 316L, low carbon steel
Diameter: minimum diameter 32mm, maximum diameter 1270mm
Length: single tube can be up to 6 meters in length
Gap: 0.25mm, 0.5mm, 0.7mm, 1.0mm, 1.5mm is a regular gap. We can
produce gaps of 0.1-50mm
Joints: Generally, there are joints at both ends of the pipe, such
as flanges, weld rings, or threads, so that the pipes can be
connected to meet the needs of use.