|
[China]
Trade Verify
Address: Xiaoshang Village, Yingli Town, Jinzhou City, Hebei Province, China
Contact name:Anna
Jinzhou City Shitan Machinery Equipment CO. LTD. |
|
Verified Suppliers
|
|
|
Well Drilling Rig Gxy-1c Crawler Drilling Rig Crawler Chassis Drilling Rig
Introduction to drilling rig:
| Type | GXY-1 | |
| Hole depth | 150m | |
| Hole diameter | 110mm | |
| Final hole diameter | 75mm | |
| Diameter of drill rods | Φ42/50mm | |
| Drilling angle | 90°-75° | |
| Dimension(L*W*H) | 1640*1030*1440mm | |
| Weight(without power unit) | 500KG | |
| Rotary head | Direct rotary speed | 142;285;570 r/min |
| Feeding stroke | 450mm | |
| Lifting capacity | 25kN | |
| Feeding capacity | 15kN | |
| Max. Torque | 1200N.m | |
| Hoist | Running speed of drum | 55;110;220 r/min |
| Max. lifting capacity, single line | 10KN | |
| Diameter of steel wire rope | 9.3mm | |
| Capacity of drum | 27m | |
| Mud pump(Horizontal Single-acting) | Max. displacement | 77L/min |
| Max. pressure | 1.2Mpa | |
| Stroke | 100m | |
| Stroke per Minute | 96min | |
| Diameter of liner | 80mm | |
| Oil pump (YBC-12/80 Gear pump) | Pressure | 8Mpa |
| Displacement | 8ml/r | |
| Speed | 1500r/min | |
| Power unit | Electric motor Model Y132M-4 | 7.5KW,1440r/min |
| Diesel engine Model S1100 | 10.3KW,2200r/min | |
The main features are as follows:
1. The rig has high input power, high output torque and strong
drilling ability.
2. The high output speed of the drilling rig is mainly suitable for
diamond core drilling and engineering geological investigation.
3. The drilling rig is equipped with a rotator, and the body is an
integral casting, which improves the structural strength.
4. It is equipped with hydraulic feeding mechanism and hydraulic
chuck clamping mechanism at the upper end of vertical shaft to
improve drilling efficiency and reduce labor intensity.
5. In order to extend the life of the power head, the hydraulic
control of the power head is used to move back to make the frame
move away from the orifice.
6. The drilling rig is equipped with active drill pipe, which has
high drilling efficiency, safety and reliability.
7. The rig adopts double disc normally closed friction clutch with
flexible opening and closing and convenient operation and
adjustment.
8. The gearbox of drilling rig adopts automobile gearbox structure,
single handlebar transmission and interlock mechanism, so it is
easy to operate.
9. If the drill is separated from the water pump and the water pump
and the drill is separately equipped with power, the output torque
of the drill can be improved, especially when entering deep hole
drilling, the power will not drop, which will cause the
contradiction of the water pump and avoid accidents in the hole.
10. The drilling rig is compact in structure, small in volume and
light in weight, with the largest part less than 100kg, which is
convenient for disassembly and handling, and is suitable for
working in hilly or mountainous areas.
11. It can be equipped with large hole vibrator and control system
according to the need to improve the ability of handling accidents.
12. The rig is equipped with a 7.0m light pipe drill tower with
simple structure and convenient installation and displacement.
