1MT Loading Crawler Track Undercarriage For Drilling Rig Machines Engineering Industry

1 MT Loading Crawler Track Undercarriage For Drilling Rig Machines Engineering Industry

Product Description

Crawler undercarriage, including engineering machinery undercarriage, skid steer loader undercarriage, agricultural machinery undercarriage, garden machinery undercarriage and the matched spare parts: track roller, top roller, sprocket, idler and rubber track.

Product Specification

Product Advantages

Our Rubber Track are prepared with natural rubber. It possesses very good properties of wear resistance, tear resistance and non-disintegration etc. The adhesion between the rubber and the steel frame is very strong, the replacement is convenient an the service life is long,it is suitable for various vehicle like excavator,pavers,bitumen transportation trucks etc.Most suitable for small light industry and small construction machinery industry. Light industry is generally agricultural machinery within 1 to 4 tons. The construction machinery industry is mostly used in the small drilling industry.

Product Application

Crawler chassis assembly is mainly used for special occasions, such as military parade, tanks, armored vehicles, etc. What are its advantages: rubber track has the advantages of protecting the ground, rubber track walking system, low noise, low vibration, comfortable riding, etc. It is suitable for situations with high speed and many transfers, and achieves the all-road performance. Reliable electrical instruments and complete machine status monitoring system provide reliable assurance for the driver to operate correctly

Due to the different use methods and soil conditions, the working life of rubber track also varies greatly. Generally speaking, its average life is about 2000 hours. However, when working in rock or easily worn environment, the service life will be halved; On the contrary, the working life will be doubled in a better environment. When the user checks the track and chassis, don't forget to drive again to check the oil level and cleanliness. This part is easy to be ignored, and there is usually less oil left.

The choice of working environment is as follows:

(1)The temperature of the rubber crawler is generally between -25° + 55°.
(2)The salt of chemicals, oil and seawater will accelerate the aging of the track. In such an environment, the track should be cleaned frequently.
(3)The road surface with sharp protrusions (such as steel bars, stones, etc.) can damage the rubber track.
(4)The edge stone, rut or uneven road surface of the road will cause cracks on the ground side pattern of the track edge. This crack can continue to be used without injuring the steel cord.
(5)Gravel and gravel pavement will cause early wear of the rubber surface in contact with the load-bearing wheel to form a small crack. Severe moisture will invade, causing the core iron to fall off and the steel wire to break.